Some variables not loading in Tecplot

nick.l.thomas · September 20, 2018, 02:56

I am running a transient solution for a vertical axis wind turbine, and when I load the .cgns files in Tecplot there is data missing from some variables. For example, I can create a contour of the x velocity, but when I try to do the same for pressure or y velocity no data loads (the contour is one color). Checking the data set info, the Var status for these missing variables is "not loaded", but loading the variables does not help.

In my .cfx file, under output control > results > output variables list, all the variables I want are listed. Likewise, under output control > export > output variables list, all the variables I want are listed there as well. When running the .res file, I can create contours of all the variables, it's only in Tecplot that the problem exists.

Any ideas what I'm missing here? This is my first attempt at a transient solution so I could be making a pretty basic mistake.

JohnConnell · October 25, 2018, 17:48

Hello Nick,

If your dataset shows the variables in the Data Set Info dialog, it is likely loaded correctly. I would check in your Data -> Spreadsheet for information about your other variables at each time step. There you can see if any data is located in your files.

If you would like us to take a look at your dataset, you can send it to us at support@tecplot.com. We could get on a call to help talk you through loading your data and getting the relevant Contour plots.

Thanks,
John Connell
Tecplot Technical Support Specialist

September 20, 2018, 02:56	Some variables not loading in Tecplot	#1
nick.l.thomas New Member Nick Thomas Join Date: Sep 2018 Posts: 27 Rep Power: 7	I am running a transient solution for a vertical axis wind turbine, and when I load the .cgns files in Tecplot there is data missing from some variables. For example, I can create a contour of the x velocity, but when I try to do the same for pressure or y velocity no data loads (the contour is one color). Checking the data set info, the Var status for these missing variables is "not loaded", but loading the variables does not help. In my .cfx file, under output control > results > output variables list, all the variables I want are listed. Likewise, under output control > export > output variables list, all the variables I want are listed there as well. When running the .res file, I can create contours of all the variables, it's only in Tecplot that the problem exists. Any ideas what I'm missing here? This is my first attempt at a transient solution so I could be making a pretty basic mistake.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tecplot: read UDM variables from fluent data files	denis.sanga@hotmail.it	FLUENT	0	July 24, 2018 05:40
Problem with importing FDS files to Tecplot and see all variables	taban	Tecplot	4	March 11, 2018 07:41
Tecplot 360 2017 Release 2	manohar1487	Main CFD Forum	0	August 28, 2017 02:08
Overbar for variables in axes label for Tecplot 10	babakflame	Tecplot	0	November 5, 2014 14:30
Loading Cell Values in Tecplot	P1361	OpenFOAM Post-Processing	3	September 16, 2014 04:02

October 25, 2018, 17:48		#2
JohnConnell New Member John Connell Join Date: Apr 2017 Posts: 7 Rep Power: 9	Hello Nick, If your dataset shows the variables in the Data Set Info dialog, it is likely loaded correctly. I would check in your Data -> Spreadsheet for information about your other variables at each time step. There you can see if any data is located in your files. If you would like us to take a look at your dataset, you can send it to us at support@tecplot.com. We could get on a call to help talk you through loading your data and getting the relevant Contour plots. Thanks, John Connell Tecplot Technical Support Specialist