|
[Sponsors] |
How to insert the solution time in different units? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 19, 2019, 03:52 |
How to insert the solution time in different units?
|
#1 |
New Member
MengqiangHu
Join Date: Feb 2019
Posts: 13
Rep Power: 7 |
Hi all,
I want to insert a text that include the flow time in the software tecplot. I tried the way about &(SOLUTIONTIME), but the unit of flow time can not be changed. And equations are not allowed in the text. So how can I change the value of 3600s to 1h? Ps. The flow time in my case is very large, for example 604800s, so I have to change it to make the graph more understandable. Thank you. |
|
February 19, 2019, 19:10 |
|
#2 |
Senior Member
Scott Fowler
Join Date: May 2009
Posts: 119
Rep Power: 17 |
POSTHU,
There is no direct way to do this within the Tecplot 360 user interface, but it can be done with a simple Python script, which you can download from the Tecplot Github repository here: https://github.com/Tecplot/handyscri..._time_units.py This script is hard coded to divide solution time by 3600. It will add Zone Auxiliary data in HH:MM:SS format as well as change the Zone's solution time in place. This is done so you can see the effects of each. If you haven't used PyTecplot, the Python API to Tecplot 360 you'll have to fulfill the prerequisites, which are Tecplot 360 2017 R3 or later, a 64-bit version of Python, and PyTecplot installed. I hope this helps. Scott |
|
February 19, 2019, 19:25 |
|
#3 |
New Member
MengqiangHu
Join Date: Feb 2019
Posts: 13
Rep Power: 7 |
Thank you for your help, I will try.
|
|
Tags |
tecplot360 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AMI speed performance | danny123 | OpenFOAM | 21 | October 24, 2020 04:13 |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
dynamic Mesh is faster than MRF???? | sharonyue | OpenFOAM Running, Solving & CFD | 14 | August 26, 2013 07:47 |
Low Mixing time Problem | Mavier | CFX | 5 | April 29, 2013 00:00 |
plot over time | fferroni | OpenFOAM Post-Processing | 7 | June 8, 2012 07:56 |