[nikosb]

I want to read transient data from a single .plt file as shown below:

VARIABLES = "X", "Y", "Z", "U", "V", "W","FX", "FY", "FZ"
ZONE I=  11, T="0001", DATAPACKING = POINT, SOLUTIONTIME=     0.34874
     -0.0010000      0.0250000      0.0250000      0.0000000      0.0000000      0.0000000     -0.0000000      0.0000009      0.0000106
      0.0090000      0.0250000      0.0250001     -0.0000000      0.0000001      0.0000003     -0.0000000     -0.0000037      0.0000223
      0.0190000      0.0250000      0.0250004     -0.0000000      0.0000000      0.0000009     -0.0000000     -0.0000108      0.0000265
      0.0290000      0.0250000      0.0250007     -0.0000000      0.0000001      0.0000016     -0.0000000     -0.0000123      0.0000301
      0.0390000      0.0250000      0.0250011     -0.0000000      0.0000003      0.0000025     -0.0000000     -0.0000014      0.0000265
      0.0490000      0.0250000      0.0250014     -0.0000000      0.0000004      0.0000035     -0.0000000      0.0000091      0.0000287
      0.0590000      0.0250000      0.0250016     -0.0000000      0.0000003      0.0000047     -0.0000000      0.0000073      0.0000283
      0.0690000      0.0250000      0.0250018     -0.0000000      0.0000001      0.0000061     -0.0000000     -0.0000060      0.0000280
      0.0790000      0.0250000      0.0250018     -0.0000000      0.0000002      0.0000079     -0.0000000     -0.0000120      0.0000264
      0.0890000      0.0250000      0.0250018     -0.0000000      0.0000003      0.0000098     -0.0000000     -0.0000045      0.0000219
      0.0990000      0.0250000      0.0250018     -0.0000001      0.0000002      0.0000116      0.0000040      0.0000003      0.0000095
ZONE I=  11, T="0001", DATAPACKING = POINT, SOLUTIONTIME=     0.70678
     -0.0010000      0.0250000      0.0250000      0.0000000      0.0000000      0.0000000     -0.0000000     -0.0000010      0.0000046
      0.0090000      0.0250000      0.0250001     -0.0000000      0.0000000      0.0000003     -0.0000000     -0.0000039      0.0000111
      0.0190000      0.0250000      0.0250003     -0.0000000      0.0000000      0.0000010     -0.0000000     -0.0000053      0.0000141
      0.0290000      0.0250000      0.0250008     -0.0000000     -0.0000001      0.0000016     -0.0000000     -0.0000055      0.0000122
      0.0390000      0.0250000      0.0250014     -0.0000000     -0.0000002      0.0000021     -0.0000000     -0.0000051      0.0000133
      0.0490000      0.0250000      0.0250022     -0.0000000     -0.0000001      0.0000030     -0.0000000     -0.0000024      0.0000140
      0.0590000      0.0250001      0.0250031     -0.0000000      0.0000000      0.0000049     -0.0000000     -0.0000019      0.0000139
      0.0690000      0.0250001      0.0250041     -0.0000000      0.0000001      0.0000074     -0.0000000     -0.0000007      0.0000145
      0.0790000      0.0250001      0.0250052     -0.0000000      0.0000002      0.0000100     -0.0000000      0.0000025      0.0000157
      0.0890000      0.0250002      0.0250064     -0.0000000      0.0000003      0.0000129     -0.0000000      0.0000075      0.0000183
      0.0990000      0.0250002      0.0250076     -0.0000001      0.0000005      0.0000162      0.0000036      0.0000037      0.0000090

When I read this file Tecplot reads it as multiple zone. This is meant to be one zone containing data from multiple time instances. How can I do that in Tecplot with a single file?