Search results

Create the page "Static pressure" on this wiki!

• Nomenclature
  <td>Specific heat at constant pressure</td> <td>Static pressure</td>
  4 KB (766 words) - 20:23, 11 June 2011
• Best practice guidelines for turbomachinery CFD
  ... 2D section of a blade. For cases with many long blades or vanes, like low-pressure turbines, a 2D simulation can also provide reasonable results. If the area ...lation. This is often the case in compressors and fans, where the negative pressure gradients make the boundary layers grow much quicker than what they do in f
  41 KB (6,252 words) - 08:46, 4 March 2023
• Isentropic Mach number
  ... in the freestream outside of the boundary layers. Usually the inlet total pressure is used. :<math>p</math> is the local [[Static pressure]].
  1 KB (159 words) - 09:06, 16 August 2007
• Reynolds averaged equations
  <math>\tilde{p}(\vec{x},t)</math> represents the static pressure, <math>\tilde{T}_{ij}^{(v)}(\vec{x},t)</math>, the viscous(or deviatoric) s
  17 KB (2,883 words) - 22:16, 14 May 2006
• Fluid
  ...ence of this behaviour is Pascal's law which entails the important role of pressure in characterising a fluid's state.
  1 KB (215 words) - 23:53, 13 September 2005
• Combustion
  ...entative speed of the flow and the reference pressure is the thermodynamic pressure. Hence, the set of reference quantities to characterize a low-Mach number f Pressure (static) <math>P_o=\rho_o \bar r T_o</math> From Boyle-Mariotte
  156 KB (25,897 words) - 22:14, 17 March 2011
• Lift and drag
  * <math>p</math> is the static pressure
  1 KB (240 words) - 11:08, 27 September 2005
• Introduction to turbulence/Reynolds averaged equations
  <math>\tilde{p}(\vec{x},t)</math> represents the static pressure, <math>\tilde{T}_{ij}^{(v)}(\vec{x},t)</math>, the viscous(or deviatoric) s ...side are also like those in the mean motion, and represent the fluctuating pressure gradient and the fluctuating viscous stresses. The third term on the right-
  45 KB (7,578 words) - 08:35, 21 August 2013
• Stratford's separation criterion
  ...art of the pressure recovery where the max velocity and the minimum static pressure is obtained the boundary layer is on the verge of separation when: *<math>C'_p</math> is the canonical pressure distribution defined by:
  3 KB (543 words) - 11:10, 11 December 2013
• Hydrodynamic/acoustic splitting
  ...ber flows, it is interesting to note that the total change of hydrodynamic pressure <math>DP/Dt</math> is considered as pressure. It is also considerable for the turbulent flow noise. The static pressure field of incompressible LES presents the
  7 KB (1,056 words) - 22:26, 30 July 2008