Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Problem with a nozzle and ambient volume

Updated Threads

Like Tree

6Likes

4 Post By Far
2 Post By Far

Search this Thread

Prev

Previous Post

Next Post

Next

December 14, 2012, 07:43	Problem with a nozzle and ambient volume	#1
Davide_sd Member Davide Join Date: Dec 2012 Posts: 33 Rep Power: 13	Hi all, i'm trying to mesh a nozzle connected to an ambient volume; you can see the geometry pic attached. The nozzle have a small injector connected in the divergent. In the pics you can see the actual blocking and the premesh. I have managed to mesh the nozzle correctly using an O-grid, but i'm not able to mesh correctly the front faces of the ambient volume; as you can see in the premesh pic, i have several distorsion. Is there a way to mesh the front faces? Thank you! Geometry: http://s18.postimage.org/ibdnm9d5l/Geometry_post.jpg Blocking: http://s14.postimage.org/97uuwklqp/Blocking.jpg Premesh: http://s12.postimage.org/3pk3zk0bx/Premesh_post.jpg

Tags

ambient volume, icem 3d, nozzle

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shock in nozzle - when	Christian	Main CFD Forum	5	September 20, 2014 09:26
Probelm with supersonic exhaust to ambient	newj	CFX	2	August 9, 2012 18:01
Supersonic nozzle exit conditions	Betty	Main CFD Forum	13	May 24, 2012 00:26
compressible flow in a counterflow nozzle	d.vamsidhar	FLUENT	0	November 24, 2005 01:45
nozzle jet solution by compressibe and incompressi	minun	Main CFD Forum	2	September 7, 2000 08:23

All times are GMT -4. The time now is 17:36.