|
[Sponsors] |
[ICEM] Multizone meshing Problem for External Flow Meshing |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 19, 2013, 10:24 |
Multizone meshing Problem for External Flow Meshing
|
#1 |
Senior Member
Ali
Join Date: Jan 2012
Location: Pakistan
Posts: 134
Rep Power: 16 |
Hi,
i am trying to mesh on a fin-body configuration using multizone option in ICEM 14.5, facing problem while filling the 2D block to 3D fill. The geometry consists of body+fins (360 deg no symmetry) and a farfield (cylinder). The body is enclosed in the farfield surface (no contact between the body and farfield). The material point is defined between the body and farfield. 2D surface block initialized very well. When I tried to fill it with Multizone with advanced filling option, volume filled the farfield ignoring the body. No volume mesh, why? Anybody can help me? Its an external flow problem.
__________________
Best Regards Ali Last edited by Hybrid; March 19, 2013 at 10:27. Reason: To edit title, subject heading |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Boundary condition problem for open channel flow | Andy | CFX | 9 | June 11, 2016 07:20 |
[ANSYS Meshing] Solid inside Fluid - Multizone meshing | supercolli | ANSYS Meshing & Geometry | 2 | July 9, 2014 13:20 |
internal flow and external flow ? | Pathway0320 | FLUENT | 1 | November 17, 2006 03:37 |
Can 'shock waves' occur in viscous fluid flows? | diaw | Main CFD Forum | 104 | February 16, 2006 05:44 |
External flow field. | Moon | FLUENT | 3 | March 5, 2003 10:32 |