Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[TurboGrid] Partial cut off at trailing edge

Updated Threads

Reply

Search this Thread

February 6, 2015, 10:06	Partial cut off at trailing edge	#1
MrDaimon New Member Gilberto Santo Join Date: Apr 2012 Location: Gent (Belgium) Posts: 18 Rep Power: 14	Hello everyone, I am pretty new to TurboGrid and I am trying to build up a mesh for testing a wind turbine blade. The fact is that this blade has a cut-off trailing edge just close to the root, while close to the tip the trailing edge is unique. Is it still possible to create such a geometry in TG? If yes, how? I can't really specify the TE and LE in the curve file, since I have more than 500 profiles! Thanks in advance!

Reply

Tags

cut-off, trailing edge, turbogrid, wind turbine

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to set periodic boundary conditions	Ganesh	FLUENT	15	November 18, 2020 06:09
[DesignModeler] Creating a blunt trailing edge from collapsed leading edge	gmd	ANSYS Meshing & Geometry	0	March 2, 2012 09:48
[ICEM] Hole near sharp trailing edge of airplane/wing geometry	jlichtwa	ANSYS Meshing & Geometry	2	September 21, 2010 15:19
Which trailing edge is correct for meshing of aerofoils for CFX	LSC	CFX	0	May 10, 2009 12:45
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55

All times are GMT -4. The time now is 03:23.