|
[Sponsors] |
[ICEM] Looking for quick tutorial on creating unstructured mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 2, 2016, 06:25 |
Looking for quick tutorial on creating unstructured mesh
|
#1 |
New Member
Phanikumar
Join Date: Mar 2016
Posts: 5
Rep Power: 10 |
Hi
Could any please tell me what are the steps involved for doing an unstructured mesh.As i am very new to Ansys Icem, i don't know completely about the unstructured mesh. I have read some tutorials , which i feel that they are not enough for me to do. I am currently learning to mesh(unstructured) an Airfoil.Could anyone please tell me how to do it. Thankyou |
|
March 2, 2016, 09:11 |
|
#2 | |
Super Moderator
|
Quote:
1. Import geometry and check quality of it. Set tolerance, units etc. 2. set global parameters and shell meshing parameters 3. set curve parameters if you want to use patch dependent 4. Set surface parameters (curve parameters if you want more control). Change method to patch independent in shell meshing. 5. Set inflation parameters for curves in part mesh setup and put no of layer, first layer height and expansion ratio. 6. Compute mesh and check quality. 7. If every thing is ok, then set boundary conditions, solver and output the mesh. |
||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how to set periodic boundary conditions | Ganesh | FLUENT | 15 | November 18, 2020 06:09 |
decomposePar problem: Cell 0contains face labels out of range | vaina74 | OpenFOAM Pre-Processing | 37 | July 20, 2020 05:38 |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 03:19 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
unstructured vs. structured grids | Frank Muldoon | Main CFD Forum | 1 | January 5, 1999 10:09 |