Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] 3D free bock mesh type with structured Hexa

Updated Threads

Reply

Search this Thread

November 9, 2017, 01:11	3D free bock mesh type with structured Hexa	#1
Sina.Li New Member Sina Join Date: Jun 2015 Posts: 7 Rep Power: 10	I meshed a building in a domain with the Hexa blocks method. There are holes in the building forming through-building openings. Now I need to change the mesh inside the hole to one of the free types such as "all tri","hex-dominant" and etc.. I converted the mapped to free and used "3D free block mesh type". I do not know how to construct the volume mesh now. When I check using the cut plane there are just surfaces that are meshed, not volume. Also, there are walls inside the hole that I want to use prism on them. Can any one help me? Building: Close-up:

Reply

Tags

free block type, hex dominant, hexa block, icem cfd

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
[Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam)	Aadhavan	OpenFOAM Meshing & Mesh Conversion	2	March 8, 2018 01:47
Modified pimpleFoam solver to MRFPimpleFoam solver	hiuluom	OpenFOAM Programming & Development	12	June 14, 2015 21:22
rhoReactingFoam error	shenzhou1987	OpenFOAM Running, Solving & CFD	3	January 20, 2015 22:19
singularity?	mihaipruna	OpenFOAM Running, Solving & CFD	5	April 24, 2012 17:18

All times are GMT -4. The time now is 20:55.