|
[Sponsors] |
[DesignModeler] New to DM - body not validated |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 7, 2019, 10:58 |
New to DM - body not validated
|
#1 |
New Member
Joao Correia
Join Date: Jul 2012
Posts: 15
Rep Power: 13 |
Long time since I last posted as I haven't been doing much CFD! But now need to get back into it.
I'm trying to run a vehicle in fluent. Using the Workbench I've imported the model into DM and created the domain, which has a yellow tick. Checking the error I get: "At least one of the imported/attached/converted bodies could not be validated" Anyone has any literature or know what the likely issues might be? Basically the vehicle is exported as a solid from NX as a step file. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
6dof model - floating body | flinde | FLUENT | 13 | March 6, 2021 14:32 |
Propulsion of solid body in two phases | Nautiker87 | OpenFOAM Pre-Processing | 0 | September 29, 2017 06:45 |
Two Way FSI of Highly Flexible Body | Sunny Chitti | Structural Mechanics | 0 | June 27, 2017 14:22 |
[snappyHexMesh] dynamic mesh: rotating body with increasing/decreasing distance to fixed body | mo_na | OpenFOAM Meshing & Mesh Conversion | 3 | July 26, 2016 04:51 |
[Need some advise] Am I doing right?? Simulating a rotational mixer | setasena | STAR-CCM+ | 4 | March 10, 2013 10:32 |