[Workbench] shroud clearance from bladegen to blade editor(geometry) -- CFD Online Discussion Forums

July 18, 2019, 16:02	shroud clearance from bladegen to blade editor(geometry)	#1
Nitrox416 New Member Join Date: Nov 2018 Posts: 6 Rep Power: 7	Hi guys, despite imposing the clearance to the correct layer, the geometry is blocking the importing procedure because of error related to the presence of clearance, I am saying this because otherwise the system is importing correctly the geometry from bladegen in design modeller. The clearance if and only if I import geometry directly in turbogrid I need blade editor to modify some features of the fluid domain somebody has some suggestions? thank you

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Meshing a rotor blade with tip clearance	Julian121	ANSYS Meshing & Geometry	0	December 9, 2018 09:49
[BladeModeler] BladeGen/ Turbogrid Tip clearance	Prak_32	ANSYS Meshing & Geometry	1	February 4, 2018 09:31
BladeGen/ Turbogrid Tip clearance	Prak_32	Main CFD Forum	1	January 22, 2018 15:29
[BladeModeler] How to set the shroud diameter in Blade Generator	Stabum	ANSYS Meshing & Geometry	1	January 17, 2018 14:22
[ICEM] Turbine blade with filleting and tip clearance	Pursuor	ANSYS Meshing & Geometry	4	July 7, 2010 13:56

All times are GMT -4. The time now is 10:01.