|
[Sponsors] |
[Workbench] shroud clearance from bladegen to blade editor(geometry) |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 18, 2019, 16:02 |
shroud clearance from bladegen to blade editor(geometry)
|
#1 |
New Member
Join Date: Nov 2018
Posts: 6
Rep Power: 7 |
Hi guys,
despite imposing the clearance to the correct layer, the geometry is blocking the importing procedure because of error related to the presence of clearance, I am saying this because otherwise the system is importing correctly the geometry from bladegen in design modeller. The clearance if and only if I import geometry directly in turbogrid I need blade editor to modify some features of the fluid domain somebody has some suggestions? thank you |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Meshing a rotor blade with tip clearance | Julian121 | ANSYS Meshing & Geometry | 0 | December 9, 2018 09:49 |
[BladeModeler] BladeGen/ Turbogrid Tip clearance | Prak_32 | ANSYS Meshing & Geometry | 1 | February 4, 2018 09:31 |
BladeGen/ Turbogrid Tip clearance | Prak_32 | Main CFD Forum | 1 | January 22, 2018 15:29 |
[BladeModeler] How to set the shroud diameter in Blade Generator | Stabum | ANSYS Meshing & Geometry | 1 | January 17, 2018 14:22 |
[ICEM] Turbine blade with filleting and tip clearance | Pursuor | ANSYS Meshing & Geometry | 4 | July 7, 2010 13:56 |