 |
 |
 |
|
|
|
[Sponsors] | ||||
[ICEM] meshing in icem and post processing in cfx |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 18, 2019, 02:11
|
meshing in icem and post processing in cfx
|
#1 |
|
New Member
Shubhalil
Join Date: Jul 2019
Posts: 1
Rep Power: 0  |
Hello,
I am trying to do meshing on the rotor blade using ICEM, but cfx solver showing error and not couldn't proceed further. I have used the same boundary conditions on turbogrid mesh so confident about cfx-pre. As per the suggestion of cfx solver I had checked rotational axis, finer mesh but couldn't work out. please look at the attached file, suggest the suitable changes. |
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CFX Pre & Post Startup Error | vigges | CFX | 12 | March 17, 2023 03:30 |
| [ICEM] The ICEM Guide for CFX Users | JuPa | ANSYS Meshing & Geometry | 11 | September 4, 2017 09:43 |
| [ICEM] Simple pipe meshing - problems with y+ in CFX | Keizers | ANSYS Meshing & Geometry | 23 | January 15, 2015 08:00 |
| [ICEM] 2 way FSI, CFX + Mechanical + ICEM, Remesh, Deformation due to fluid flow | binoyjjohn | ANSYS Meshing & Geometry | 8 | June 25, 2014 09:00 |
| [ICEM] ICEM meshing problem | xyq102296 | ANSYS Meshing & Geometry | 6 | October 28, 2010 10:09 |
Linear Mode
