[ANSYS Meshing] Moving mesh: Inflation following the rigid body?

jakub_ · March 23, 2018, 06:26

Hello,

I would like to kindly ask you to help me work out the problem,

i.e. how to make it possible so that the inflation will follow a box motion udf, and also how to enforce the front side of the inflation to do layering instead of a rigid body as depicted below?

Thank you very much for your help.

BR,
Jakub

jakub_ · March 24, 2018, 08:44

Never mind, I worked that out.

poya0070 · August 15, 2019, 00:28

Hello Dear
Is there a way for non-rigid movement (deformation by user defined function)that inflation remain unchanged?

March 23, 2018, 06:26	Moving mesh: Inflation following the rigid body?	#1
jakub_ New Member Jakub Join Date: Mar 2018 Posts: 13 Rep Power: 8	Hello, I would like to kindly ask you to help me work out the problem, i.e. how to make it possible so that the inflation will follow a box motion udf, and also how to enforce the front side of the inflation to do layering instead of a rigid body as depicted below? Thank you very much for your help. BR, Jakub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
Rigid body rotation about a moving axis	k1k	FLOW-3D	0	July 16, 2015 02:41
Waterwheel shaped turbine inside a pipe simulation problem	mshahed91	CFX	3	January 10, 2015 11:19
Turbulent solver rigid body mechanics	philippose	OpenFOAM Running, Solving & CFD	53	July 16, 2011 13:35
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11

March 24, 2018, 08:44		#2
jakub_ New Member Jakub Join Date: Mar 2018 Posts: 13 Rep Power: 8	Never mind, I worked that out.

August 15, 2019, 00:28		#3
poya0070 New Member poya Join Date: Jun 2013 Posts: 7 Rep Power: 12	Hello Dear Is there a way for non-rigid movement (deformation by user defined function)that inflation remain unchanged?