CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Several questions on meshing and simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   September 15, 2020, 08:04
Default Several questions on meshing and simulation
New Member
Join Date: Aug 2020
Posts: 2
Rep Power: 0
Bakhtiyar is on a distinguished road
Hello, I am trying to replicate the paper with simplified human geometry. I have created a domain, which is divided in 3 and meshed separately.
My questions are:

1. How do I do mesh verification (grid independence)? Do I just increase mesh nodes size by 50% for each region?
2. How do I create some kind of bond between different types of meshes so the data transfered is not distorted?
3. Can I cut the domain in half and apply symmetry boundary condition?
4. I tried to run the simulation with CFX with residual target 10^-5, Everything goes fine till 10^-4, but after starts to fluctuate. The solver gives a warning: "there is a some percentage of wall placed at the outlet. Please consider changing to opening type boundary condition." Any suggestions?

Thank you
Bakhtiyar is offline   Reply With Quote


ansys meshing, cfx, hybrid mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] gmshToFoam generates patches with 0 faces and 0 points Simurgh OpenFOAM Meshing & Mesh Conversion 3 October 26, 2021 09:27
CFD simulation of gas cicrcuit breaker in fluent with dynamic meshing. Mahesh7238 FLUENT 1 April 5, 2021 01:21
Vented explosion simulation: issues with multi-region meshing and simulation Dami OpenFOAM Running, Solving & CFD 0 November 13, 2019 09:47
[ICEM] 2D meshing of tandem cylinder in VIV for dynamic simulation mhamiddi2 ANSYS Meshing & Geometry 0 May 16, 2019 06:50
[GAMBIT] Questions about 2D dynamic meshing turbo_agni ANSYS Meshing & Geometry 4 January 12, 2015 07:28

All times are GMT -4. The time now is 06:32.