|
[Sponsors] |
[ICEM] Trouble generating Chevron nozzle mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 13, 2022, 23:56 |
Trouble generating Chevron nozzle mesh
|
#1 |
New Member
Hoang Long
Join Date: Jun 2022
Posts: 3
Rep Power: 3 |
Hello everyone,
I'm new to ICEM CFD and I have to generate mesh for a 3D Chevron nozzle in order to compare with a Baseline one. The mesh for Baseline seems easier than Chevron which has a number of chevrons at the outlet. Can anyone give me some method or tool to deal with this problem? Thank you very much! https://drive.google.com/file/d/1Cf-...ew?usp=sharing https://drive.google.com/file/d/1K9R...ew?usp=sharing |
|
June 17, 2022, 01:58 |
|
#2 |
Member
Chrowale
Join Date: Sep 2021
Location: Bandung, Indonesia
Posts: 59
Rep Power: 4 |
I think you can actually use two symmetry plane to analyze just one of the six chevron section, that way the blocking would be fairly easy.
I don't know if there's a combustion mixing in the region and if it's valid or not if you apply this method. |
|
June 20, 2022, 05:02 |
|
#3 |
New Member
Hoang Long
Join Date: Jun 2022
Posts: 3
Rep Power: 3 |
Thank you very much for your help, Chrowale,
It's been for a while and now I'm able to mesh the geometry by splitting it in to 1:6, anyway, I'd try to do the meshing with the entire nozzle and check out the difference between them |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] snappyHexMesh stuck when snap is turned on | yukuns | OpenFOAM Meshing & Mesh Conversion | 3 | February 2, 2021 13:05 |
decomposePar problem: Cell 0contains face labels out of range | vaina74 | OpenFOAM Pre-Processing | 37 | July 20, 2020 05:38 |
[snappyHexMesh] Creating multiple multiple cell zones with snappyHexMesh - a newbie in deep water! | divergence | OpenFOAM Meshing & Mesh Conversion | 0 | January 23, 2019 04:17 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
[ICEM] Generating mesh for modified parts in ICEM without changing mesh of other parts | a.habibi | ANSYS Meshing & Geometry | 5 | October 4, 2012 05:10 |