[ICEM] Is there a way to extend my geometry after I've made all the blocks?

Pedron97 · July 26, 2023, 12:02

Hi everyone.
I'm currently working with a 3D geometry of a pipe with a perpendicular injection, and an expansion. I've already made all the blocks, and I need to extend it, so that a region that has 3m, now would be 10m long, maintaining all the other dimensions. Is there a way to do it so I don't need to remake all the previous steps, shuch as blocking? I have several steps saved before converting it to unstruct mesh. Thanks!!

Gert-Jan · July 27, 2023, 16:29

You can extrude a surface mesh.
In the menu Edit Mesh, there is a buitton that allows you to do this.
You need to
1) select the elements to extrude
2) define a name for the Volume, for the part with side elements, and for the part containing the new elements at the end.
3) define the number elements in extrude direction and size of each element and growth factor.
4) Press apply.

July 26, 2023, 12:02	Is there a way to extend my geometry after I've made all the blocks?	#1
Pedron97 New Member Join Date: Sep 2022 Posts: 1 Rep Power: 0	Hi everyone. I'm currently working with a 3D geometry of a pipe with a perpendicular injection, and an expansion. I've already made all the blocks, and I need to extend it, so that a region that has 3m, now would be 10m long, maintaining all the other dimensions. Is there a way to do it so I don't need to remake all the previous steps, shuch as blocking? I have several steps saved before converting it to unstruct mesh. Thanks!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How do I connect a geometry to my solver	devansh.purohit	Main CFD Forum	4	November 16, 2021 08:51
[snappyHexMesh] Geometry disappears when using SnappyHexMesh with multiple blocks	pizzaspinate	OpenFOAM Meshing & Mesh Conversion	3	February 3, 2015 12:19
[ICEM] Blocking an elbow (block not conforming to geometry)	llrr12	ANSYS Meshing & Geometry	0	January 22, 2015 22:06
Merging the blocks in ICEM	saisanthoshm88	ANSYS Meshing & Geometry	1	December 27, 2010 10:14
vitual _ real	deneb	FLUENT	3	January 22, 2007 04:31

July 27, 2023, 16:29		#2
Gert-Jan Senior Member Gert-Jan Join Date: Oct 2012 Location: Europe Posts: 1,827 Rep Power: 27	You can extrude a surface mesh. In the menu Edit Mesh, there is a buitton that allows you to do this. You need to 1) select the elements to extrude 2) define a name for the Volume, for the part with side elements, and for the part containing the new elements at the end. 3) define the number elements in extrude direction and size of each element and growth factor. 4) Press apply.