[ANSYS Meshing] Very long cells that don't match mesh edge sizing settings

Karem · August 11, 2023, 13:02

Good evening all,

While performing meshing, I did mesh sizing using number of divisions with bias. the mesh created was structured but in the inflation created some cells were very long and are not divided as the setting divisions was which in turn made the aspect ratio very high (82,000).
What should I do to make all cells as structured as I want and to improve mesh quality?

Thanks

evcelica · August 22, 2023, 14:42

Are you using Hard or Soft behavior? Soft will ignore you sometimes, so try using hard behavior.

August 11, 2023, 13:02	Very long cells that don't match mesh edge sizing settings	#1
Karem New Member Karem Elmahalawy Join Date: Aug 2023 Posts: 6 Rep Power: 2	Good evening all, While performing meshing, I did mesh sizing using number of divisions with bias. the mesh created was structured but in the inflation created some cells were very long and are not divided as the setting divisions was which in turn made the aspect ratio very high (82,000). What should I do to make all cells as structured as I want and to improve mesh quality? Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell	Arman_N	OpenFOAM Meshing & Mesh Conversion	1	May 20, 2019 17:16
[snappyHexMesh] Number of cells in mesh don't match with size of cellLevel	colinB	OpenFOAM Meshing & Mesh Conversion	14	December 12, 2018 08:07
[snappyHexMesh] sHM layer process keeps getting killed	MBttR	OpenFOAM Meshing & Mesh Conversion	4	August 15, 2016 03:21
[snappyHexMesh] SnappyHexMesh for internal Flow	vishwa	OpenFOAM Meshing & Mesh Conversion	24	June 27, 2016 08:54
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 09:38

August 22, 2023, 14:42		#2
evcelica Senior Member Erik Join Date: Feb 2011 Location: Earth (Land portion) Posts: 1,167 Rep Power: 23	Are you using Hard or Soft behavior? Soft will ignore you sometimes, so try using hard behavior.