|
[Sponsors] |
August 28, 2009, 01:01 |
ICEM CFD Airfoil Tutorial Input
|
#1 |
New Member
Join Date: Jun 2009
Posts: 14
Rep Power: 16 |
Cant find any tutorials online i hope the experts can come in and help me create a 3D Cgrid strutured mesh over an airfoil and hope this thread would be like a tutorial for it. The mesh i want to achieve looks something like this
http://www.cfd-online.com/Forums/cfx...l-meshing.html I am using ICEM cfd now and i have started to Import the airfoil coordinates and drawn using spline to trace over the airfoil. The airfoil domain is also created. To import the airfoil coordinates i used Import geometry formatted data point Then points and spline lines are used to create the airfoil and domain. The airfoil trailing edge has been slightly modified and is replaced with a straight line instead of a sharp edge. Would like to know how should i proceed from here to create the blocks and create a mesh. Would prefer the approach of creating a 2D mesh then extruding it 3D by 1m. Thanks. Last edited by Tom; August 28, 2009 at 01:38. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ansys ICEM CFD 11.0 tutorial needed | Jiuan | CFX | 18 | July 20, 2016 21:08 |
ICEM CFD use for ? | Vu Trinh Tuan | CFX | 14 | April 11, 2011 18:38 |
Help needed with Cornell's Gambit airfoil tutorial | Arti | ANSYS Meshing & Geometry | 3 | May 30, 2009 03:40 |
ICEM CFD Modules | Boris | FLUENT | 1 | March 12, 2004 14:37 |
importing mesh from ICEM CFD into CFX 5 | Jay | CFX | 2 | November 12, 2002 13:46 |