[ICEM] Meshing Error with a Solidworks Geometry

Fractal · September 30, 2010, 10:20

Hey Forum,

I am trying to mesh a floor and a diffuser for our FSAE car but it won't properly mesh due to some error shown below.

I used solidworks for my geometry and our car also uses solidworks. ICEM won't import some solidworks files as well for some reason but that's another problem. The error mentioned is "ERROR: Part manager failed to attach assembly".

Any help would be appreciated.

Sai Krishna · October 31, 2019, 23:36

Try parasolid x_t format as I also faced this issue.

jbo214 · November 12, 2019, 12:59

The Solidworks file format (*.sldprt, *.sldasm) is proprietary. Unless ICEM has licensed the file format reader from SolidWorks (or if there is a version mismatch), you cannot open SolidWorks files directly. You will need to export your CAD file to a non-proprietary file format (*.STEP, *.X_T, *.IGES, *.ACIS) and use that as an intermediary.

September 30, 2010, 10:20	[ICEM] Meshing Error with a Solidworks Geometry	#1
Fractal New Member Join Date: Aug 2010 Posts: 2 Rep Power: 0	Hey Forum, I am trying to mesh a floor and a diffuser for our FSAE car but it won't properly mesh due to some error shown below. I used solidworks for my geometry and our car also uses solidworks. ICEM won't import some solidworks files as well for some reason but that's another problem. The error mentioned is "ERROR: Part manager failed to attach assembly". Any help would be appreciated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Gmsh] Problem meshing an imported geometry	Alicia	OpenFOAM Meshing & Mesh Conversion	0	March 30, 2010 04:53
[ICEM] Ship Hull imported geometry	nuovodna	ANSYS Meshing & Geometry	0	February 25, 2010 10:09
IGES/IGS format geometry file for icem meshing	littlelz	Main CFD Forum	0	May 27, 2008 18:24
Meshing the geometry	Vidya Raja	FLUENT	0	February 26, 2006 19:44
meshing geometry in gambit	soundar	FLUENT	1	January 7, 2005 02:59

October 31, 2019, 23:36		#2
Sai Krishna Member Sai Krishna Join Date: May 2018 Posts: 37 Rep Power: 7	Try parasolid x_t format as I also faced this issue.

November 12, 2019, 12:59		#3
jbo214 Member Joshua Join Date: Aug 2014 Posts: 49 Rep Power: 11	The Solidworks file format (.sldprt, .sldasm) is proprietary. Unless ICEM has licensed the file format reader from SolidWorks (or if there is a version mismatch), you cannot open SolidWorks files directly. You will need to export your CAD file to a non-proprietary file format (.STEP, .X_T, .IGES, .ACIS) and use that as an intermediary.