CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

how do i fix installation error of ansys 19.0 on ubuntu 18.04

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree4Likes
  • 2 Post By Simbelmynė
  • 1 Post By Simbelmynė
  • 1 Post By Simbelmynė

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 22, 2018, 10:33
Unhappy how do i fix installation error of ansys 19.0 on ubuntu 18.04
  #1
New Member
 
Join Date: Oct 2018
Posts: 2
Rep Power: 0
rid_taki is on a distinguished road
hi everyone

ansys 19.0 stuck on 95% in the setup (instalation) when i try to install it on ubuntu 18.04 ,when i check the install.err file it say this :

Code:
Revision: Release 19.0

   ###### Error #######
   Error executing configuration script '/ansys_inc/v190/commonfiles/configs/linx64/config/AnsConfigRSM.sh'
   '"/ansys_inc/v190/commonfiles/configs/linx64/config/AnsConfigRSM.sh"  -installdir "/ansys_inc" -rev 190 -dotrev 19.0 -scripttosource "/ansys_inc/v190/commonfiles/configs/linx64/config/ConfigCommon.tcl" -sourcedir "/tmp/ans_install_tmp3168" -os_lang en-us -install ' terminated after 1 attempts with the following error(s): 
       Unknown error
   Exit Code: 0
   readlink: invalid option -- 'p'
   Try 'readlink --help' for more information.
   dirname: missing operand
   Try 'dirname --help' for more information.
   dirname: missing operand
   Try 'dirname --help' for more information.
   dirname: missing operand
   Try 'dirname --help' for more information.
   dirname: missing operand
   Try 'dirname --help' for more information.
   dirname: missing operand
   Try 'dirname --help' for more information.
   /ansys_inc/v190/RSM/Config/tools/linux/rsmconfig: 26: /ansys_inc/v190/RSM/Config/tools/linux/rsmconfig: /Framework/bin/Linux64/runwb2: not found/ansys_inc/v190/aisol/.workbench: 1: /ansys_inc/v190/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: rpm: not found
   /ansys_inc/v190/aisol/.workbench: 1: /ansys_inc/v190/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: rpm: not found
   /ansys_inc/v190/aisol/.workbench: 1: /ansys_inc/v190/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: rpm: not found
   ###### Error #######
   Error was encountered during the licensing configuration: 
   '"/ansys_inc/shared_files/licensing/tools/bin/runlmconfig" -install -lang en-us ' terminated after 1 attempts with the following error(s): 
       Unknown error
   Exit Code: 127
   /ansys_inc/shared_files/licensing/tools/bin/linx64/ansyslm_config: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory



and the install.log say :




Code:
Revision: Release 19.0

Platform specifics:
    Linux taki-Lenovo-G510 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

Username of Installer: root
User Has Administrator Privileges
/tmp/ans_install_tmp3168/instcore -style windows -launchdir /home/taki/Desktop/ansys19/Setup -usetempdir /tmp/ans_install_tmp3168
Initial mount directory:
    /home/taki/Desktop/ansys19/Setup
Installation Directory:
    /ansys_inc

Linux x64
     ANSYS, Inc. Products
          Explicit Dynamics
               Autodyn
               LS-DYNA
          Fluid Dynamics
               CFD-Post only
               CFX (includes CFD-Post)
               Chemkin
                    Energico
                    Model Fuel Library (Encrypted)
                    Reaction Workbench
               EnSight
               FENSAP-ICE
               Fluent (includes CFD-Post)
               Forte
               Polyflow (includes CFD-Post)
               TurboGrid
          ICEM CFD
     ANSYS Additional Tools
          Icepak (includes CFD-Post)
          Remote Solve Manager Standalone Services
     ANSYS Geometry Interfaces
          ACIS Geometry Interface
          Catia, Version 5 Geometry Interface
          NX Geometry Interface
          Parasolid Geometry Interface




Date verification complete...No conflicts found.

Reading the installation media contents - please wait.

  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tcl/COMMON.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tcl/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tcl/COMMON.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tcl/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tk/COMMON.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tk/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/autodyn/LINX64.GZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/lsdyna/LINX64.GZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/ensight/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/fluent/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/icemcfd/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/mono/LINX64_1.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/mono/LINX64_2.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/mono/LINX64_3.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/afd/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/afdrun/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/rsm/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/configs/rsm/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/ccm/LINX64.GZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cads/acispara/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cads/datakit/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/geomunig/LINX64.GZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cads/nx/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/license/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/hlp/hlplic/HLPLIC.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/framewrk/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/common/LINX64.GZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cads/acispara/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/hlp/hlpviewer/HLPVIEWER.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cpythext/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cpythnew/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/sgcharts/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/fwgfx/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/rsm/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/configs/rsm/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/tp/LINX64.GZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/configs/wb/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addincfg/wb/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/mw/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addincfg/turbosys/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addins/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addins/ansoft/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/corewb/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/wbonebld/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/engdata/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/icemwb/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addincfg/ekm/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/ekm/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/sec/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/ccm/LINX64.GZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/ecadxltr/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/electro/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/aas/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cfxcomon/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/post/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addincfg/cfdpost/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cfxcomon/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/configs/cfdpost/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cfx/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addincfg/cfx/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/configs/cfx/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/post/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cfxcomon/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/afd/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/afdrun/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/chemkin/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/fensap/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/configs/fensap/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/fluentc/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addincfg/fluent/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/configs/fluent/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/forte/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addincfg/forte/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/polyflow/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addincfg/polyflow/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/configs/polyflow/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/turbogrd/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addincfg/turbosys/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cfxcomon/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/configs/tg/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/configs/icemcfd/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addincfg/icemcfd/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/icepak/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/addincfg/icepak/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/configs/icepak/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/hlp/hlpicepaksa/HLPICEPAKSA.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/hlp/hlpviewer/HLPVIEWER.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tcl/COMMON.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tcl/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tk/COMMON.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tk/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/common/LINX64.GZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/cads/acispara/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/ccm/LINX64.GZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/ecadxltr/LINX64.TGZ ...



Performing licensing configuration via the following command...
   "/ansys_inc/shared_files/licensing/lic_admin/anslic_admin_silent"  -silentinstallclient -release "19.0" -licserverinfo 2325:1055:taki-Lenovo-G510 -lang en-us 
RSS is disabled

Licensing configuration has completed.

Configuring Help ...
/Framework/bin/Linux64/runwb2 -cmd mono /RSM/bin/AnsConfigRSM.exe

>>>--------------------------------------->
Start Installation: ن أكتوبر 22 11:29:05 2018
Revision: Release 19.0

Platform specifics:
    Linux taki-Lenovo-G510 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

Username of Installer: root
User Has Administrator Privileges
/tmp/ans_install_tmp6568/instcore -style windows -launchdir /home/taki/Desktop/ansys19/Setup -usetempdir /tmp/ans_install_tmp6568 -manifestFileDir /home/taki/Desktop/ansys19/Setup/manifest/license
Initial mount directory:
    /home/taki/Desktop/ansys19/Setup
Installation Directory:
    /ansys_inc

Linux x64
     ANSYS, Inc. License Manager


Licensing files on the installation media have the same date or are more recent than those currently installed.
     The files will be updated....


Date verification complete...Please see above messages for any detected conflicts.

Reading the installation media contents - please wait.

  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tcl/COMMON.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/instcore/tcl/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/licserv/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/lmcenter/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/license/LINX64.TGZ ...
  Extraction: /home/taki/Desktop/ansys19/Setup/hlp/hlplic/HLPLIC.TGZ ...



Performing licensing configuration via the following command...
   "/ansys_inc/shared_files/licensing/tools/bin/runlmconfig" -install -lang en-us 

Problems were encountered running the licensing configuration.

Updating /ansys_inc/shared_files/licensing/init_ansysli ...



i want to know if anyone can help me.
rid_taki is offline   Reply With Quote

Old   October 22, 2018, 13:06
Default
  #2
Senior Member
 
Lee Strobel
Join Date: Jun 2016
Posts: 117
Rep Power: 5
Time4Tea is on a distinguished road
Hi, I'm not entirely sure, but a couple of things that stand out for me in the error file:


1) The last line says that it can't find 'libpng12.so.0', which suggests there is a library that it is looking for that it can't find. Perhaps check to see if you have 'libpng12' installed?


2) Some of the lines in the error file include the text: 'rpm: not found'. rpm is the package manager used by the Red Hat/Fedora Linux distributions; however, you say you are installing for Ubuntu? Are you sure you have the correct ANSYS package for Ubuntu (should use the apt package manager, also dpkg/Synaptic)?
Time4Tea is offline   Reply With Quote

Old   October 22, 2018, 14:31
Default
  #3
New Member
 
Join Date: Oct 2018
Posts: 2
Rep Power: 0
rid_taki is on a distinguished road
i will try to install the messing packages , we'll soon know if that's the problem.
for your second question , i don't really know what packages are missing in my ubuntu thought i had read in the manual that the suported distros are redhat ,susse,and centos ,i wonder if it's possible to install ansys19 on ubuntu 18.04.
rid_taki is offline   Reply With Quote

Old   October 22, 2018, 14:50
Default
  #4
Senior Member
 
Lee Strobel
Join Date: Jun 2016
Posts: 117
Rep Power: 5
Time4Tea is on a distinguished road
Quote:
Originally Posted by rid_taki View Post
i will try to install the messing packages , we'll soon know if that's the problem.
for your second question , i don't really know what packages are missing in my ubuntu thought i had read in the manual that the suported distros are redhat ,susse,and centos ,i wonder if it's possible to install ansys19 on ubuntu 18.04.

Red Hat, OpenSuse and CentOS are all based on the rpm package manager, which the installer seems to be looking for. If the documentation doesn't say that Ubuntu is supported, then it probably won't work, because applications that are packaged for one Linux package manager generally won't be compatible with others.

If that is the case, you could try installing CentOS in a virtual machine (e.g. Virtualbox) and see if ANSYS will install on that. If so, then you might want to consider installing CentOS on a dedicated partition on your hard disk, to get the best performance. You can have Ubuntu and CentOS installed at the same time on different partitions; however, you may have to re-partition your hard-disk - if so, back up your data!
Time4Tea is offline   Reply With Quote

Old   October 22, 2018, 16:30
Default
  #5
Senior Member
 
Lucky Tran
Join Date: Apr 2011
Location: Orlando, FL USA
Posts: 3,572
Rep Power: 44
LuckyTran has a spectacular aura aboutLuckyTran has a spectacular aura about
libpng12 was replaced by libpng16 in (you might not have guessed it) ubuntu16.

You need to install the missing libpng12 library or wait for a future version of Ansys that uses libpng16 or maybe just find the right installer for your distro.

Last edited by LuckyTran; October 25, 2018 at 10:32.
LuckyTran is offline   Reply With Quote

Old   October 25, 2018, 02:10
Default
  #6
Senior Member
 
Simbelmynė's Avatar
 
Join Date: May 2012
Posts: 366
Rep Power: 10
Simbelmynė is on a distinguished road
I recently installed ANSYS 19.2 on Ubuntu 18.04 without any problems.


There are a few steps to make it work on a Debian based distro though, but you can find that information here (that guide is based on ANSYS 18.2 for linux Mint 18.x, but it still works if you update all text with the version accordingly).
Time4Tea and wbywbywby6 like this.
Simbelmynė is offline   Reply With Quote

Old   November 3, 2018, 01:37
Default
  #7
Senior Member
 
Daniel
Join Date: Mar 2013
Location: Noshahr, Iran
Posts: 319
Rep Power: 16
Daniel_Khazaei will become famous soon enough
Quote:
Originally Posted by Simbelmynė View Post
I recently installed ANSYS 19.2 on Ubuntu 18.04 without any problems.


There are a few steps to make it work on a Debian based distro though, but you can find that information here (that guide is based on ANSYS 18.2 for linux Mint 18.x, but it still works if you update all text with the version accordingly).
Hi,


does the installation end?
does everything work? namely design modeler?

regards,
D. Khazaei

Last edited by Daniel_Khazaei; November 3, 2018 at 05:04.
Daniel_Khazaei is online now   Reply With Quote

Old   November 3, 2018, 06:28
Default
  #8
Senior Member
 
Simbelmynė's Avatar
 
Join Date: May 2012
Posts: 366
Rep Power: 10
Simbelmynė is on a distinguished road
Yes everything that I have tested works. Designmodeler works.
Simbelmynė is offline   Reply With Quote

Old   November 3, 2018, 07:58
Default
  #9
Senior Member
 
Daniel
Join Date: Mar 2013
Location: Noshahr, Iran
Posts: 319
Rep Power: 16
Daniel_Khazaei will become famous soon enough
Quote:
Originally Posted by Simbelmynė View Post
Yes everything that I have tested works. Designmodeler works.
would please provide a step by step guide?
when I try to install ansys 19.2, the installation stops at around 89% and never goes any further...

I have tried to follow the steps provided here as you suggested:

Ansys 18.2 on Linux Mint 18.3 - HowTo
Daniel_Khazaei is online now   Reply With Quote

Old   November 3, 2018, 12:46
Default
  #10
Senior Member
 
Simbelmynė's Avatar
 
Join Date: May 2012
Posts: 366
Rep Power: 10
Simbelmynė is on a distinguished road
Can you confirm that it did not install completely? i.e. can you check the installation folder and try to ”runwb2” or ”fluent”?
Daniel_Khazaei likes this.
Simbelmynė is offline   Reply With Quote

Old   November 3, 2018, 13:05
Default
  #11
Senior Member
 
Daniel
Join Date: Mar 2013
Location: Noshahr, Iran
Posts: 319
Rep Power: 16
Daniel_Khazaei will become famous soon enough
Quote:
Originally Posted by Simbelmynė View Post
Can you confirm that it did not install completely? i.e. can you check the installation folder and try to ”runwb2” or ”fluent”?
Well, the installation process doesn't pass 89%, but the extraction of the selected licensed products is finished. The process stuck here:

Code:
Generating daemon scripts for this installation.
AWPROOTDIR = /usr/ansys_inc/v192
Creating RSM Launcher script ...
Created service script: rsmlauncher

AWPROOTDIR = /usr/ansys_inc/v192
Creating ANSYS RSM Cluster Master Service script ...
Created service script: arcmaster

AWPROOTDIR = /usr/ansys_inc/v192
Creating ANSYS RSM Cluster Node Service script ...
Created service script: arcnode
Workbench and ANSYS Fluent start, but design modeler didn't until I have found a solution today by adding
Code:
export TERM = xterm
to my bashrc!
Now design modeler runs properly...

However I'm facing another problem, Ansys meshing opens properly but it hangs when I press update or generate mesh...does it work for you?
Furthermore I get the following warning with Fluent:
Code:
  Warning: Cannot find hardware accelerated drivers. Performance might be severely impacted.
Regards,
Daniel_Khazaei is online now   Reply With Quote

Old   November 5, 2018, 05:40
Default
  #12
Senior Member
 
Simbelmynė's Avatar
 
Join Date: May 2012
Posts: 366
Rep Power: 10
Simbelmynė is on a distinguished road
I would focus on the last problem with the drivers. Make sure that you have installed the drivers for your graphics card (hopefully you have an Nvidia card). Note that the latest driver is not always the best.


From my experience Fluent has always been easier to run under non-supported distros, compared to Design Modeler and Meshing, so you should make sure that Fluent works first.
Daniel_Khazaei likes this.
Simbelmynė is offline   Reply With Quote

Old   November 20, 2018, 08:08
Default
  #13
New Member
 
Yuan Lihuan
Join Date: Sep 2018
Posts: 3
Rep Power: 3
nickkid is on a distinguished road
I got the same problem when I tried installing both v191 and v192 on Fedora 26. The installtion process was just stuck at the 'arcnode'. I closed the installation window and I could run fluent normally (mesh was generated by my collegue), but when I tried to mesh by myself with ICEM, the window just wouldn't reply any information after I press the button (without information about 'hardware accelerated drivers' like you received).
Quote:
Originally Posted by Daniel_Khazaei View Post
Well, the installation process doesn't pass 89%, but the extraction of the selected licensed products is finished. The process stuck here:

Code:
Generating daemon scripts for this installation.
AWPROOTDIR = /usr/ansys_inc/v192
Creating RSM Launcher script ...
Created service script: rsmlauncher

AWPROOTDIR = /usr/ansys_inc/v192
Creating ANSYS RSM Cluster Master Service script ...
Created service script: arcmaster

AWPROOTDIR = /usr/ansys_inc/v192
Creating ANSYS RSM Cluster Node Service script ...
Created service script: arcnode
Workbench and ANSYS Fluent start, but design modeler didn't until I have found a solution today by adding
Code:
export TERM = xterm
to my bashrc!
Now design modeler runs properly...

However I'm facing another problem, Ansys meshing opens properly but it hangs when I press update or generate mesh...does it work for you?
Furthermore I get the following warning with Fluent:
Code:
  Warning: Cannot find hardware accelerated drivers. Performance might be severely impacted.
Regards,
nickkid is offline   Reply With Quote

Old   November 20, 2018, 08:10
Default
  #14
New Member
 
Yuan Lihuan
Join Date: Sep 2018
Posts: 3
Rep Power: 3
nickkid is on a distinguished road
Hi ,could anyone please tell me the path of the install.err? Thanks!
nickkid is offline   Reply With Quote

Reply

Tags
ansys19, install err, ubuntu 18.04

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[waves2Foam] waves2Foam on an Ubuntu 18.04 with OpenFOAM 1712 JGadelho OpenFOAM Community Contributions 19 October 15, 2019 07:50
[OpenFOAM.com] v1712 on Ubuntu 18.04: "no completion added" arslanadeel OpenFOAM Installation 1 June 18, 2018 11:49
[OpenFOAM.org] icoFoam: Command not found in OpenFOAM 3.0.1 installation on Ubuntu 16.10 febriyan91 OpenFOAM Installation 1 June 25, 2017 14:34
ANSYS 15.0 for Ubuntu Linux Distribution Crank-Shaft ANSYS 6 May 5, 2017 13:03
Problems installation ANSYS 16 WIN64 8 Ttormuz ANSYS 0 January 21, 2016 02:44


All times are GMT -4. The time now is 13:26.