Compatibility between 13.0 and 12.1

Tim72 · March 8, 2011, 10:37

Hello to everybody,

I have been having some issues with the ANSYS 13.0 it was running fine then the dreaded “AnsysWBU.exe recountered a problem” error started to appear and “no connection could be made because the target machine actively refused it” – when I try to open/update the project meshes.

(This machine is purely for modelling so offline with no antivirus/firewall etc)

I have been trying to trouble shot the error for some time now with no joy so and have decided to go back to trusty 12.1 which is running no problem

Obviously I don’t want to lose all the analysis and work which was done in 13.0 I am therefore inquiring how I may be able to save projects in 13.0 so they can be opened in 12.1?

Thank you in advance for your support

Best regards

rafiktharwat · April 7, 2011, 14:53

I have the same problem PLZ help

Ghayoumi · June 4, 2011, 04:00

Hi,
I have this problem, too.

HELP PLEASE.

Ghayoumi · June 4, 2011, 04:09

Tim 72 !

I work between 12 and 13 , you can use your ansys v13 Data in v12 and inverse.

please if you can solve our previous problem, inform us.

mishikhan · July 2, 2011, 06:05

Quote:

Originally Posted by Tim72

Hello to everybody,

I have been having some issues with the ANSYS 13.0 it was running fine then the dreaded “AnsysWBU.exe recountered a problem” error started to appear and “no connection could be made because the target machine actively refused it” – when I try to open/update the project meshes.

(This machine is purely for modelling so offline with no antivirus/firewall etc)

I have been trying to trouble shot the error for some time now with no joy so and have decided to go back to trusty 12.1 which is running no problem

Obviously I don’t want to lose all the analysis and work which was done in 13.0 I am therefore inquiring how I may be able to save projects in 13.0 so they can be opened in 12.1?

Thank you in advance for your support

Best regards

May I know that the analysis work you have already done was on the same system or on some other system. Also can you give some specs of your system?? (e.g OS? bit? Ram? # of processor core etc etc.)

March 8, 2011, 10:37	Compatibility between 13.0 and 12.1	#1
Tim72 New Member Join Date: Mar 2011 Posts: 1 Rep Power: 0	Hello to everybody, I have been having some issues with the ANSYS 13.0 it was running fine then the dreaded “AnsysWBU.exe recountered a problem” error started to appear and “no connection could be made because the target machine actively refused it” – when I try to open/update the project meshes. (This machine is purely for modelling so offline with no antivirus/firewall etc) I have been trying to trouble shot the error for some time now with no joy so and have decided to go back to trusty 12.1 which is running no problem Obviously I don’t want to lose all the analysis and work which was done in 13.0 I am therefore inquiring how I may be able to save projects in 13.0 so they can be opened in 12.1? Thank you in advance for your support Best regards

June 4, 2011, 04:00	ansyswbu.exe error	#3
Ghayoumi New Member Ghayoumi Join Date: Apr 2011 Posts: 4 Rep Power: 15	Hi, I have this problem, too. HELP PLEASE.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] icem mesh to CFX 12.1	atturh	ANSYS Meshing & Geometry	6	February 24, 2011 14:33
gambit with linux and fluent 12.1	kharnabnew	FLUENT	0	October 5, 2010 09:33
Hardware for running ANSYS Fluent 12.1	ngj_22	Hardware	2	September 29, 2010 07:26
compatibility fluent 12.1 with fluent 6.3	ak6g08	FLUENT	4	September 9, 2010 11:07
Fluent 6.3.26 vs 12.1 and partition method	Anorky	FLUENT	0	April 27, 2010 10:55

April 7, 2011, 14:53		#2
rafiktharwat New Member rafik Join Date: Jan 2011 Posts: 16 Rep Power: 15	I have the same problem PLZ help

June 4, 2011, 04:09		#4
Ghayoumi New Member Ghayoumi Join Date: Apr 2011 Posts: 4 Rep Power: 15	Tim 72 ! I work between 12 and 13 , you can use your ansys v13 Data in v12 and inverse. please if you can solve our previous problem, inform us.