CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > AVL FIRE

Divergence of Boiling Temperature in a Cooling Jacket

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 25, 2018, 04:02
Default Divergence of Boiling Temperature in a Cooling Jacket
  #1
New Member
 
Philip
Join Date: Oct 2018
Posts: 2
Rep Power: 0
Phipsy is on a distinguished road
Hi guys,


i need to simulate a cooling jacket and i want to implicate the roughness of the tubes and the boiling phenomenon.
The problem is that the boiling temperature diverged and in don't know the reason. It is a steady mode simulation and the initialization mode is set to "uniform initialization". I applied the "Single Phase Boiling" only to the head and the model activates at the 400 iteration so the pressure is established.
The other settings I took from the Solution type "Cooling Jacket".


Does anyone know the problem here ?


kind regards
Phipsy is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help - Divergence in AMG solver - temperature nareshzeeda1994 FLUENT 5 March 29, 2018 09:27
Two Phase Flow In Vertical Pipe stonepreston FLUENT 2 October 31, 2017 08:35
How can I avoid Divergence when simulating a boiling flux in FLUENT P_VS Fluent Multiphase 0 July 14, 2016 08:59
Divergence in AMG solver: Temperature Alex07 FLUENT 0 June 17, 2015 15:03
Divergence detected in AMG solver: temperature Alex07 FLUENT 0 June 2, 2015 16:44


All times are GMT -4. The time now is 15:58.