|
[Sponsors] |
February 21, 2005, 15:26 |
Problems of convergencia in arrays
|
#1 |
Guest
Posts: n/a
|
I am simulating the dispersion inside of a set of obstaculos and I am not obtaining to converge my solution in finer meshes
|
|
February 21, 2005, 16:24 |
Re: Problems of convergencia in arrays
|
#2 |
Guest
Posts: n/a
|
Hi,
That is fascinating to hear, but if you are not more specific we cannot help you. If you want us to try to assist please give some more details. Glenn Horrocks |
|
February 21, 2005, 16:54 |
Re: Problems of convergencia in arrays
|
#3 |
Guest
Posts: n/a
|
I work inside with the dispersion of Pollutants of a set of obstaculos. A pen exists that is launched for inside of a set of cubicos obstaculos with a configuration of of seven obstaculos for seven. In this numerical simulation I am calculating the profiles of speed and the concentration of the pollutant in determined points of the configuration, however when I go to test a finer mesh I do not obtain to reach the convergencia of the solution.
|
|
February 22, 2005, 16:29 |
Re: Problems of convergencia in arrays
|
#4 |
Guest
Posts: n/a
|
Hi,
Is your simulation transient or steady state? What differencing scheme are you using? What initial conditions are you using? What is a representative Reynolds number of the flow? What is a representative Mach number of the flow (if it is compressible)? Glenn Horrocks |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Problems with coedge curves and surfaces | tommymoose | ANSYS Meshing & Geometry | 6 | December 1, 2020 11:12 |
Array problems | Malachy | FLUENT | 2 | March 5, 2012 15:11 |
Needed Benchmark Problems for FSI | Mechstud | Main CFD Forum | 4 | July 26, 2011 12:13 |
Two-phase air water flow problems by activating Wall Lubrication Force | challenger85 | CFX | 5 | November 5, 2009 05:44 |
Some problems with Star CD | Micha | Siemens | 0 | August 6, 2003 13:55 |