CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > CFX

spray drying

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 20, 2005, 06:29
Default spray drying
Posts: n/a
I modelled spray-drying process by using particle-tracking method. My droplet is salt solution (water +solid salt). In CFX Post particle track showed me the minimum and the maximum salt concentration in the droplet (salt mass fraction in the droplet). Also, it plots a coloured value of this mass fraction.

However, I want to know the droplets salt mass fraction mean value (the salt mass fraction mean value for all tracks) at a certain position or at exit.

thank you
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
HELP! post processing for spray modelling hamish888 FLUENT 1 August 2, 2012 10:21
spray plume Jay Siemens 0 July 25, 2008 22:26
Spray slows then stops coastal593 OpenFOAM Running, Solving & CFD 6 July 31, 2007 16:14
spray injection mmacrb FLUENT 0 January 10, 2007 05:57
problems with unsteady spray simulation Mathias FLUENT 1 July 20, 2006 16:13

All times are GMT -4. The time now is 08:01.