CFD Online Logo CFD Online URL
Home > Forums > CFX

convergence problem

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 14, 2006, 02:55
Default convergence problem
Posts: n/a
Hi everybody, I try to solve flow through centrifugal compressor stage - rotor stator interaction - transient. First I solved it in the design point and it was OK. Now I try it for non-design point(lower massflow) and I have problem with convergnece. I tried all tech tips etc. Any ideas? Thanks Jindra
  Reply With Quote

Old   September 17, 2006, 01:33
Default Re: convergence problem
Posts: n/a
The same thing i am attempting for a blower. as soon as i will be ble to resolve the issue i will inform u. In case u resolve this problem. please take time to inform me
  Reply With Quote

Old   September 18, 2006, 00:41
Default Re: convergence problem
Posts: n/a
Ok, thanks.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
convergence problem when use pisoFoam, LES for wind tunnel case Forrest_Lei OpenFOAM 3 July 19, 2011 06:00
convergence problem commonyue Main CFD Forum 1 December 1, 2009 04:54
Convergence of CFX field in FSI analysis nasdak CFX 2 June 29, 2009 01:17
3D Fluid Flow Convergence problem Emily FLUENT 2 March 21, 2007 23:18
Non Convergence of 3D Heat transfer cfd problem Balraj Main CFD Forum 3 December 9, 2004 01:24

All times are GMT -4. The time now is 10:38.