|
[Sponsors] |
March 2, 2009, 21:11 |
no such command: 1216, error reading file!!
|
#1 |
Guest
Posts: n/a
|
After I created a block by associating the edge to the geometry(points, lines) and saved.
When I'd like to open this file again, the CFD show me a message as follow: -------------------------------------------------------- Loading blocking file "D:/fishbone_block.blk" no such command: 1216 error reading file D:/fishbone_block.blkError in opening Blocking file; -------------------------------------------------------- Neither I import blocking solely or change the file path, the CFX always show me this message above. This means the block I've created was invalid. I create a simple block then saved, but the massage still generate. How do I solve this problem? Thank you. |
|
March 2, 2009, 23:26 |
Re: no such command: 1216, error reading file!!
|
#2 |
Guest
Posts: n/a
|
The problem was solved.
I found some improper point names in the *.block. The error geometry name resulted in the *.tin and cause the generated block cann't be read. The problem was solved after I revised the geometry and regenerated the topology. Thank you for your help. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh | gschaider | OpenFOAM Community Contributions | 300 | October 29, 2014 18:00 |
channelFoam for a 3D pipe | AlmostSurelyRob | OpenFOAM | 3 | June 24, 2011 13:06 |
1.7.x Environment Variables on Linux 10.04 | rasma | OpenFOAM Installation | 9 | July 30, 2010 04:43 |
[blockMesh] BlockMesh FOAM warning | gaottino | OpenFOAM Meshing & Mesh Conversion | 7 | July 19, 2010 14:11 |
ParaView Compilation | jakaranda | OpenFOAM Installation | 3 | October 27, 2008 11:46 |