|
[Sponsors] |
December 30, 2010, 08:20 |
static pressure went outside the limite
|
#1 |
New Member
jarrai
Join Date: Sep 2010
Posts: 7
Rep Power: 15 |
Hi,
I simulate thermal-hydraulic performance of the heavy liquid metal,during simulation run i get a Note message: "while evaluating static entropy,static pressure went outside the limite. it minimum value was -9.8327e3.the bound errror was handled by clipping if this simulation prosist,consider increasing the table range". Can anybody help me understand the Note message? |
|
December 30, 2010, 08:28 |
|
#2 |
New Member
Dmitry Semikin
Join Date: Dec 2010
Posts: 16
Rep Power: 15 |
Obviously, you use some real liquid model. As I understand for myself for those liquids interdependencies of physical values are described analytically, but passed to solver as table of values. So, you should define the range in which those tables should be precalculated (the range in which material properties can vary). In properties of such materials in second tab (do not remember name exactly) at the bottom there is a property - something like "table range". Give there the min and max values for all physical values, which are used in fluid model being used (pressure, temperature etc.).
If you do not define those settings, you should have warning (or info) message in CFX-Pre output. Actually, I did not meet this problem, while working with liquids (as I work most with gases), but this happened for me, when I started to use real gases models. There are some explanations on this topic in CFX documentation. |
|
December 31, 2010, 06:35 |
|
#3 |
New Member
jarrai
Join Date: Sep 2010
Posts: 7
Rep Power: 15 |
Thank you for your help:
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
simple model, difficult outlet | Eric | CFX | 7 | May 23, 2014 08:13 |
Maintaining Static Pressure at Fluid Flow Inlet | cdevalve | FLUENT | 3 | January 14, 2012 00:11 |
How to achieve constant static pressure in inlet? | Zou Jianfeng | FLUENT | 0 | October 21, 2008 01:55 |
Setting static pressure as the inlet BC | ruined | FLUENT | 1 | March 21, 2008 14:57 |
what the result is negatif pressure at inlet | chong chee nan | FLUENT | 0 | December 29, 2001 05:13 |