CONVERGE

Read this first: How to ask a question on the forums

Page 20 of 24

Threads in Forum : CONVERGE

Rating Thread / Thread Starter	Last Post	Replies	Views
Unphysical wall heat transfer outputs magicbretzel	March 28, 2022 18:46 by magicbretzel	2	622
Data Analysis: PV diagram, IMEP, and Experimental Results gdvieira	March 30, 2022 12:22 by gdvieira	2	707
Defining new fuels is very painful motoxu	March 30, 2022 16:08 by ksrivast	1	569
Question about fixed embedding around spark-plug s.chen8	March 30, 2022 20:52 by s.chen8	2	703
Air-Cooled Switched Reluctance Motor Simulation Shelbi S	April 1, 2022 10:50 by Shelbi S	0	440
time-varying cone angle sampy	April 1, 2022 15:57 by sampy	4	550
Peak Pressure way to low in SI IC engine case - SAGE m102.992	April 4, 2022 17:10 by m102.992	0	666
Over-predict burn rate with RANS as turbulence model s.chen8	April 5, 2022 22:11 by s.chen8	2	579
Issue at dt_chem too large pradeep.raju	April 6, 2022 05:03 by pradeep.raju	0	871
Hydrogen combustion chemical mechanisms gdvieira	April 6, 2022 05:07 by pradeep.raju	6	1,285
Simulation of Urea Deposit Formation on a Clamshell Mixer Shelbi S	April 8, 2022 11:16 by Shelbi S	0	613
Simulation of a Wind Turbine Using an Actuator Line Model Shelbi S	April 15, 2022 12:17 by Shelbi S	0	687
Combustion model enable time period Hongjie	April 23, 2022 07:53 by MFGT	1	612
Over predicted combustion from RANS+SAGE s.chen8	April 27, 2022 21:28 by s.chen8	2	826
Simulation of an Offshore Capping Stack Shelbi S	April 29, 2022 11:15 by Shelbi S	0	655
Presenting your CONVERGE results dgo-cfd	May 17, 2022 14:10 by dgo-cfd	0	520
TKI for ECFM XjtuBryant	May 19, 2022 22:08 by XjtuBryant	2	705
ECFM with SAGE XjtuBryant	May 20, 2022 10:44 by psrikanth	1	835
Converge - Therm.dat issue Mahdi.Seddiq	May 23, 2022 17:59 by psrikanth	3	968
Temperature extrapolation error CI engine panos karvounis	June 1, 2022 18:20 by psrikanth	5	906
Problem with Paraview in macOS RameshK	June 2, 2022 18:14 by psrikanth	1	728
Moving boundaries with deformation HuifengGong	June 2, 2022 18:27 by psrikanth	1	634
Slow Progress in Cluster Nodes vivirichard007	June 3, 2022 08:14 by vivirichard007	4	827
One-way coupling simulation of the pressure-swirl atomizer HengLiu	June 6, 2022 11:43 by arajendran	1	680
Terminated Converge Simulation RameshK	June 10, 2022 11:59 by arajendran	1	810
Crevice model Kislay	June 10, 2022 14:01 by arajendran	2	672
Initialization by MAP files. XjtuBryant	June 15, 2022 23:24 by XjtuBryant	2	1,090
Congo - pre exponential factor Fedecola	June 21, 2022 05:08 by khaledhmz	7	1,513
CONVERGE udf Drag	June 22, 2022 14:58 by rvigneshwar	1	882
UDF for crevice model in Converge Kislay	June 24, 2022 10:58 by rvigneshwar	1	709
Failure parsing command line arguments moh110	June 27, 2022 10:37 by rvigneshwar	3	617
$convection, diffusion, flux, mass fraction (y)$ Calculate total flux of species velkon	June 29, 2022 16:52 by rvigneshwar	1	681
Backwards Flow in Impinging Jet Inlet cfd9999	July 14, 2022 10:09 by rvigneshwar	3	730
Angular momentum flux between regions atheodor	July 22, 2022 14:28 by xieshengbai	4	592
Sage - Reaction Multiplier gdvieira	July 22, 2022 15:14 by xieshengbai	1	680
grid size around the spark plug and time step when using ECFM model XjtuBryant	July 22, 2022 15:16 by xieshengbai	1	598
Laminar flame speed in ECFM model XjtuBryant	July 27, 2022 12:39 by xieshengbai	1	692
Source modeling choice s.chen8	July 29, 2022 15:39 by Xiao Ren	1	558
Calculation speed ltl	August 1, 2022 17:19 by Xiao Ren	1	555
Simulation of the Lubricant Flow Inside a Gearbox dgo-cfd	August 5, 2022 10:05 by dgo-cfd	0	534

Read this first: How to ask a question on the forums

Page 20 of 24

« First

Last »

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 02:08.