Add a fluid region with STL file

SJTUMEzzq · January 23, 2024, 21:59

I want to add a fluid region with STL file. In initial->Fluid Regions->Add a fluid region. Then choose "Use functions coefficients for" "STL Geometry". Then click "change" to choose my STL file. But when I run the preprocess simulation, Something error happened. The error message is "Abnormal exit from preprocessor" and
"processing fluid initialization regions
processing cad data for fluid region 1
"
How can I solve this problem.

MSM1985 · January 24, 2024, 06:49

Run the model with coarse mesh and this issue will be gone.

January 23, 2024, 21:59	Add a fluid region with STL file	#1
SJTUMEzzq New Member Zhaoqi Zheng Join Date: Jan 2024 Posts: 5 Rep Power: 2	I want to add a fluid region with STL file. In initial->Fluid Regions->Add a fluid region. Then choose "Use functions coefficients for" "STL Geometry". Then click "change" to choose my STL file. But when I run the preprocess simulation, Something error happened. The error message is "Abnormal exit from preprocessor" and "processing fluid initialization regions processing cad data for fluid region 1 " How can I solve this problem.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to calculate mass flow rate on patches and summation of that during the run?	immortality	OpenFOAM Post-Processing	104	February 16, 2021 08:46
OpenFoam "Permission denied" and "command not found" problems.	iyidaniel@yahoo.co.uk	OpenFOAM Running, Solving & CFD	11	January 2, 2018 06:47
what is swap4foam ??	AB08	OpenFOAM	28	February 2, 2016 01:22
[swak4Foam] Problem installing swak_2.x for OpenFoam-2.4.0	towanda	OpenFOAM Community Contributions	6	September 5, 2015 21:03
[OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12	keepfit	ParaView	60	September 18, 2013 03:23

January 24, 2024, 06:49		#2
MSM1985 Member Sehroosh Join Date: Apr 2019 Location: Pakistan Posts: 55 Rep Power: 7	Run the model with coarse mesh and this issue will be gone.