|
[Sponsors] |
Creating 2 phases distillation reactor using ansys |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 10, 2013, 05:55 |
Creating 2 phases distillation reactor using ansys
|
#1 |
Member
Chan Hiang Bin
Join Date: Apr 2013
Posts: 44
Rep Power: 13 |
Hi all,
I'm currently modelling the distillation reactor involves 2 phases (liquid and gas). I want to simulate the effects of different temperature distribution in the reactor on the extraction factor (output vapor) of the evaporated input liquid. However, I'm new to ANSYS-Fluent, so i would like to ask whether there are any similar or relevant tutorials regard this topic or someone can give me some simple ideas on doing this. I'm even stuck at producing the proper geometry model. Thanks for all the help. |
|
April 13, 2013, 08:48 |
|
#2 |
Member
Chan Hiang Bin
Join Date: Apr 2013
Posts: 44
Rep Power: 13 |
The geometry and meshing are done. Need some advises on setting the setup in Fluent model setup.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pro/E to ANSYS Parameterization Guide | Trues | ANSYS | 4 | April 18, 2018 05:52 |
[ANSYS Meshing] Creating named selections in ANSYS | ejayalv123 | ANSYS Meshing & Geometry | 3 | March 18, 2018 10:14 |
[DesignModeler] Problem creating fluid domain in ansys design modeller 14.0 | rsdsaurav | ANSYS Meshing & Geometry | 2 | January 13, 2013 00:32 |
creating a 3d terrain surface in Ansys Fluent | rakadit | FLUENT | 0 | March 28, 2012 04:37 |
Creating volume for two surfaces in Ansys | marbro | ANSYS Meshing & Geometry | 0 | May 22, 2010 11:13 |