Counter-flow simulation

kartrmswy · July 4, 2013, 04:36

Ok, discovered one more thing today - don't use the heat flux option unless you know the value of heat flux - it treats the wall as adiabatic otherwise (if you leave it zero)

Muthupandy · March 28, 2015, 22:24

Hello to everyone in this conversation, I am simulating like one of this model for both parallel and counter flow. I have gained some facts about this simulation. Thanks a lot. But problem is I have two shadow wall created as default how Can create my boundary condition for 2nd wall and shadow since there is 2 interfaces created.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
About Some Concepts:Laminar flow, turbulent flow, steady flow and time-dependent flow	Jing	Main CFD Forum	8	October 5, 2018 17:02
Domain format problem on airfoil flow simulation	andrenonaka	CFX	14	December 7, 2015 00:42
Query regarding temperature distribution in Solidworks flow simulation	syarif	FloEFD, FloWorks & FloTHERM	3	February 27, 2013 05:22
Simulation of a complex wing in solidworks flow simulation	niels1900	FloEFD, FloWorks & FloTHERM	6	April 20, 2011 10:44
Expert parameter to stop the fluid flow simulation	KK	CFX	1	February 25, 2008 16:29

July 4, 2013, 04:36		#21
kartrmswy New Member Karthik Ramaswamy Join Date: Apr 2013 Posts: 7 Blog Entries: 1 Rep Power: 13	Ok, discovered one more thing today - don't use the heat flux option unless you know the value of heat flux - it treats the wall as adiabatic otherwise (if you leave it zero)

March 28, 2015, 22:24		#22
Muthupandy New Member Muthu pandy Join Date: Feb 2015 Posts: 20 Rep Power: 11	Hello to everyone in this conversation, I am simulating like one of this model for both parallel and counter flow. I have gained some facts about this simulation. Thanks a lot. But problem is I have two shadow wall created as default how Can create my boundary condition for 2nd wall and shadow since there is 2 interfaces created.