CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Fluent help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 17, 2016, 12:04
Default Fluent help
  #1
New Member
 
haze
Join Date: Feb 2016
Posts: 6
Rep Power: 3
haze_ryder is on a distinguished road
Guys I have been working on a new project. It is a helical type of heat exchanger design.there is a helix through which fluid which is to be cooled passes through. This helix is surrounded by a cylinder with inlet (and outlet) for air flow.I have given the velocity values for both inlets (air and liquid) the outlets have been given as an outflow type .the solution does not seem to converge..
Why?
haze_ryder is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
heat transfer with RANS wall function, over a flat plate (validation with fluent) bruce OpenFOAM Running, Solving & CFD 6 January 20, 2017 07:22
CFX vs. FLUENT turbo CFX 0 February 8, 2016 13:12
Two questions on Fluent UDF Steven Fluent UDF and Scheme Programming 4 September 20, 2013 16:30
Connecting Fluent benefits and Injection Molding Software Jim87 FLUENT 0 May 21, 2013 17:55
Problems in lauching FLUENT Lourival FLUENT 3 January 16, 2008 17:48


All times are GMT -4. The time now is 23:53.