|
[Sponsors] |
problem whit set a high region temperature for start combustion |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 22, 2016, 08:26 |
problem whit set a high region temperature for start combustion
|
#1 |
New Member
Ahmad
Join Date: May 2016
Posts: 2
Rep Power: 0 |
hi dear fluent user
guys, my model is 3d duck for simulation h2/air permixed combustion i whant to set a high temprature region like 2000k in small region for start combustion i do mark thats cycle area from adapt>region and then i patch thats area from solution initialaz but when i display static temperature and set a plane in thats area thats like an arc whit min 298 and max 2000k guys plz suggest me how i can make a filled teperature region u can see thats from this link http://uploadboy.me/h0ws1d9f55su/1.jpg.html |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[openSmoke] libOpenSMOKE | Tobi | OpenFOAM Community Contributions | 562 | January 25, 2023 09:21 |
Problem with chtMultiregionFoam radiation boundary condition | baran_foam | OpenFOAM Running, Solving & CFD | 10 | December 17, 2019 17:36 |
Combustion problem | alok.cd | FLUENT | 2 | April 23, 2013 08:41 |
combustion problem | mcnair | CFX | 9 | March 22, 2011 14:06 |
Problem on high density ratio in Level Set method | Kai Yan | Main CFD Forum | 10 | December 25, 2007 06:12 |