|
[Sponsors] |
Energy residual is diverging, when simulate ideal-gas |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
April 11, 2017, 11:20 |
Energy residual is diverging, when simulate ideal-gas
|
#1 |
New Member
DENG Weriping
Join Date: Jun 2015
Posts: 16
Rep Power: 10 |
Dear all,
I want to simulate the ideal-gas Helium under normal pressure and temperature. But the residual for energy is diverging! How to deal with this? Thanks a lot! The simulation settings are following below: 1, operating pressure is 101325Pa. 2, mass flow inlet, pressure outlet. 3, grid number is 0.3million, determinent 2*2*2>0.4,Angle>32. 4, the corrant is 0.01, the relaxation keep the defualt value. 5, the density of helium is ideal-gas, the viscosity is sutherland. So where is the problem? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wrong fluctuation of pressure in transient simulation | caitao | OpenFOAM Running, Solving & CFD | 2 | March 5, 2015 21:33 |
SLTS+rhoPisoFoam: what is rDeltaT??? | nileshjrane | OpenFOAM Running, Solving & CFD | 4 | February 25, 2013 04:13 |
Orifice Plate with a fully developed flow - Problems with convergence | jonmec | OpenFOAM Running, Solving & CFD | 3 | July 28, 2011 05:24 |
Error while running rhoPisoFoam.. | nileshjrane | OpenFOAM Running, Solving & CFD | 8 | August 26, 2010 12:50 |
Unknown error | sivakumar | OpenFOAM Pre-Processing | 9 | September 9, 2008 12:53 |