Temperature convergence problem in DPM -- CFD Online Discussion Forums

July 14, 2017, 15:43	Temperature convergence problem in DPM	#1
petarcrncec New Member Petar Crnčec Join Date: May 2017 Posts: 2 Rep Power: 0	Hi, I'm trying to realize a coupled CFD-DEM simulation using EDEM and Fluent and the problem I'm facing currently is temperature convergence in fluent using discreet phase model. The temperature converges down to 1*10-5 and simply stays there. Temperatures displayed in post are completely wrong (about 100 kelvin higher or lower than expected on global scale). Inlet flow temperature is 330 K, particle temp at start is 330. Can you please give me some advice regarding this issue? Thanks!

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with zeroGradient wall BC for temperature - Total temperature loss	cboss	OpenFOAM	12	October 1, 2018 06:36
Temperature Limited Problem	tuna	FLUENT	2	March 12, 2016 07:53
Convergence issue in natural convection problem	chrisf90	FLUENT	5	March 5, 2016 08:30
CONVERGENCE PROBLEM - oil boiler	MM	FLUENT	1	February 15, 2007 05:24
convergence problem	limseokmin	FLUENT	3	November 14, 2004 12:43

All times are GMT -4. The time now is 00:48.