How to deal with the error message in fluent?

Kazi Shahid · February 3, 2020, 21:09

Dear all,
I am working on the ventilation rate of a room and just after completion of my calculation I have got this error message.

Error: Error Occured during handling message in WorkBench: Generic Command

Error Object: #f

How to deal with this error message??

Thanks in advance.

vinerm · February 4, 2020, 03:20

The message appears to be very generic and most likely has got nothing to do with your simulation. If you read the message, it mentions that it was unable to handle the message. That's alright as long as you have been able to converge and save your simulation and can post-process those.

February 3, 2020, 21:09	How to deal with the error message in fluent?	#1
Kazi Shahid New Member Join Date: Dec 2019 Posts: 4 Rep Power: 6	Dear all, I am working on the ventilation rate of a room and just after completion of my calculation I have got this error message. Error: Error Occured during handling message in WorkBench: Generic Command Error Object: #f How to deal with this error message?? Thanks in advance.

February 4, 2020, 03:20	Appears to be very generic	#2
vinerm Senior Member Vinerm Join Date: Jun 2009 Location: Nederland Posts: 2,946 Blog Entries: 1 Rep Power: 35	The message appears to be very generic and most likely has got nothing to do with your simulation. If you read the message, it mentions that it was unable to handle the message. That's alright as long as you have been able to converge and save your simulation and can post-process those. __________________ Regards, Vinerm PM to be used if and only if you do not want something to be shared publicly. PM is considered to be of the least priority.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
heat transfer with RANS wall function, over a flat plate (validation with fluent)	bruce	OpenFOAM Running, Solving & CFD	6	January 20, 2017 06:22
Fluent crash on writing data file after thousand iterations	Chuck87	FLUENT	0	September 2, 2015 16:17
Why is Fluent unable to deal with my model at the micron scale?	dixylo	FLUENT	4	December 8, 2011 23:39
Fluent 6.3 32bit vs Fluent 12.0 64bit	ibex7	FLUENT	7	April 18, 2011 02:44
Master node in parallel computing only distirubtion	syadgar	FLUENT	1	September 8, 2009 16:41