Create a mass source on a specific point

daleher · December 19, 2016, 06:42

Hi I'm an engineer who is starting to use CFD because I'm doing some research at university.
I'm modelling a duct whose geometry is shown in the picture.

mesh duct.JPG

Through this duct flows a "Mixture" made of two species (let's call them X and Y). What I'm trying to do is to create some mass sources of the species Y, in order to reproduce the generation of that species, and its transport through the duct. I have no idea how to create this sources on specific points, defined by their coordinates x,y,z.

I would really appreciate some help.

Thanks!

KevinZ09 · December 19, 2016, 08:28

If you are okay with a volumetric mass source you can just enter the source in the Cell Zone Conditions dialog box. However, it seems like you want to use a point source or a profile source, in which case you're gonna need to create a UDF to do so. The latter is much more complicated, especially if you are new to CFD.

daleher · December 19, 2016, 11:05

Yes, I supposed I've got to use an UDF to do so, because I've already used some UDF to define some material properties such as viscosity, diffusion coefficient,etc. So I think I have to use the macro "DEFINE_SOURCE (name,c,t,dS,eqn)", but the problem is that I don't know exactly how to create the source on a particular point.

mz_uon · June 1, 2021, 06:15

Hello

Have you managed to do this, create a UDF for point source?
Would appreciate it if you explained here.

Thanks

December 19, 2016, 06:42	Create a mass source on a specific point	#1
daleher New Member Join Date: Nov 2016 Posts: 4 Rep Power: 9	Hi I'm an engineer who is starting to use CFD because I'm doing some research at university. I'm modelling a duct whose geometry is shown in the picture. mesh duct.JPG Through this duct flows a "Mixture" made of two species (let's call them X and Y). What I'm trying to do is to create some mass sources of the species Y, in order to reproduce the generation of that species, and its transport through the duct. I have no idea how to create this sources on specific points, defined by their coordinates x,y,z. I would really appreciate some help. Thanks!

December 19, 2016, 08:28		#2
KevinZ09 Senior Member Kevin Join Date: Dec 2016 Posts: 138 Rep Power: 9	If you are okay with a volumetric mass source you can just enter the source in the Cell Zone Conditions dialog box. However, it seems like you want to use a point source or a profile source, in which case you're gonna need to create a UDF to do so. The latter is much more complicated, especially if you are new to CFD. daleher likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Setting the height of the stream in the free channel	kevinmccartin	CFX	12	October 13, 2022 21:43
SparceImage v1.7.x Issue on MAC OS X	rcarmi	OpenFOAM Installation	4	August 14, 2014 06:42
[swak4Foam] build problem swak4Foam OF 2.2.0	mcathela	OpenFOAM Community Contributions	14	April 23, 2013 13:59
[Gmsh] Gmsh and samplesurface	touf	OpenFOAM Meshing & Mesh Conversion	2	December 10, 2007 02:27
DecomposePar links against liblamso0 with OpenMPI	jens_klostermann	OpenFOAM Bugs	11	June 28, 2007 17:51

December 19, 2016, 11:05		#3
daleher New Member Join Date: Nov 2016 Posts: 4 Rep Power: 9	Yes, I supposed I've got to use an UDF to do so, because I've already used some UDF to define some material properties such as viscosity, diffusion coefficient,etc. So I think I have to use the macro "DEFINE_SOURCE (name,c,t,dS,eqn)", but the problem is that I don't know exactly how to create the source on a particular point.

June 1, 2021, 06:15		#4
mz_uon Member Join Date: Apr 2020 Posts: 76 Rep Power: 6	Hello Have you managed to do this, create a UDF for point source? Would appreciate it if you explained here. Thanks