|
[Sponsors] |
May 14, 2023, 18:19 |
Mrf interface acts like a wall
|
#1 |
New Member
nima rezaee babak
Join Date: Mar 2023
Posts: 1
Rep Power: 0 |
Hi guys.
I am simulating an industrial fan and after importing mesh from fluent mesher and applying the setting for mrf motion usually after initialization my mrf zone previews only the walls ( blades) and not the whole mesh. The actual problem is that the interfaces become walls and wont let the flow through. I have set the interface and interface shadow to interior. But in the calculations it acts like a wall ! The other problem is that when i want to change the mrf to sliding mesh the following error occures: error eval unbound variable error object change I have remeshed, changed the geometry, reviewed the setting and.... I have really hit a wall. The thing is that it used to work just fine ! |
|
Tags |
fluent, interface, mrf, sliding mesh |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
temperature correction limited- Star ccm+ | LpSingh | STAR-CCM+ | 15 | September 29, 2020 12:06 |
Error - Solar absorber - Solar Thermal Radiation | MichaelK | CFX | 12 | September 1, 2016 06:15 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 04:32 |
RPM in Wind Turbine | Pankaj | CFX | 9 | November 23, 2009 05:05 |
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug | unoder | OpenFOAM Installation | 11 | January 30, 2008 21:30 |