|
[Sponsors] |
April 4, 2002, 09:35 |
inlet condition ~??
|
#1 |
Guest
Posts: n/a
|
My model have two channel The property of wall is between the top channel and below channel . First mixtures [include H2 , CO2 ,H2O] flow through top of channel. Second mixtures [includes O2 , H2O , N2] flow through below of channel.but , first mixtures don't mixed with second mixtures and don't pass throgugh the interface(wall)to other channel ....the behavior of two fluid independently
Basic datas of Top channel Mass fraction of H2 is 0.066761 Mass fraction of H2O is 0.4474331069 Mass fraction of CO2 is 0.4858058 mixtures velocity is 0.43 m/sec Basic datas of Below channel Mass fraction of O2 is 0.166787867 Mass fraction of H2O is 0.26002884 Mass fraction of N2 is 0.5731832 mixtures velocity is 0.56 m/sec Two channel have a condition of inlet respectively. How to define the properties of two mixtures in condition of inlet for my model ???? but ,if it is unclear meaning for you , you can tell me ...thank you best regard to you Hsin-Ping |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with assigned inlet velocity profile as a boundary condition | Ozgur_ | FLUENT | 5 | August 25, 2015 04:58 |
How to use a solution as an inlet boundary condition in another problem in fluent | geryes | FLUENT | 0 | February 25, 2010 16:32 |
inlet and outlet boundary condition for turbomachinery solution | siamak1424 | OpenFOAM | 2 | August 15, 2009 11:14 |
outlet to inlet boundary condition | assighna | CFX | 1 | May 10, 2007 23:36 |
inlet and outlet boundary condition of pump | Thammasak | CFX | 0 | February 9, 2004 13:02 |