CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

how about NOx model

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 9, 2002, 05:57
Default how about NOx model
Posts: n/a
hi,all friends,

i have solved gambit mesh problem. and import my combustion geometry model to FLEUNT, and the result of burning chamber temperature is very good.

but another problem appears, when i use NOx model to caculate the pollutant.

error appears in main command such as "Error: unable to acquire a license for the pollutants model. Could not check out fluent-nox: No such feature exists Feature: fluent-nox License path: c:\flexlm\license.dat; FLEXlm error: -5,357 For further information, refer to the FLEXlm End User Manual, available at ""."

species:methane-air average temperature in chamber is 1900íŠ

why this happen? so grateful for your helps,

  Reply With Quote

Old   September 10, 2002, 19:28
Default Re: how about NOx model
Posts: n/a
Hi Anna, I been through a similar problem and a possible solution lies with in the license file. A path combination given by fluent to enable your NOx license is coded and typically gets updated with your license file and read in by the license server.

Once the correct license path for the NOx post processor is placed correctly in your license file the message should disapear.

Hope this will help!

  Reply With Quote

Old   September 11, 2002, 05:31
Default Re: how about NOx model
Posts: n/a
hi,Sid thank u for ur great help i will try.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
multiphaseInterFoam for RAS turbulence model chiven OpenFOAM Bugs 8 December 6, 2017 03:08
help for different between les model (subgrid-scale model) liuyuxuan FLUENT 1 October 2, 2009 15:25
2 stage axial turbine model convergence issues sherifkadry CFX 2 September 7, 2009 20:51
multi fluid mixture model issue rystokes CFX 3 August 9, 2009 19:13
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 04:27

All times are GMT -4. The time now is 20:49.