|
[Sponsors] |
June 12, 2005, 00:25 |
Controlled Meshing with GAMBIT
|
#1 |
Guest
Posts: n/a
|
hi i have some complicated geometry or lets say any complicated geometry. How can i generate a mesh of my choice i mean like coarsen and fine in my desired places. Any suggestions plz. GAMBIT just give TGRID when a complicated volume is selected fr meshing.
Thanks in advance |
|
June 12, 2005, 18:21 |
Re: Controlled Meshing with GAMBIT
|
#2 |
Guest
Posts: n/a
|
dear Masood it is very easy to controlled the grid spacing in Gambit: from Mesh --> edge select an edge by shift+click then from type select suucessive ratio say 1.2 in the part of spacing select interval count u will see the effect of that at once. for more detail contact me at omrkhairy75@yahoo.com or refer to Gambit help to read about Meshing
have a good luck Khairy _Egypt |
|
June 13, 2005, 08:26 |
Re: Controlled Meshing with GAMBIT
|
#3 |
Guest
Posts: n/a
|
That works well for 2D and 3D structured meshes, or 2D unstructured meshes. For 3D unstructured meshes, I highly recommend using sizing functions.
Hope this helps, and good luck, Jason |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gambit - meshing over airfoil wrapping (?) problem | JFDC | FLUENT | 1 | July 11, 2011 05:59 |
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing | David-CFD | ANSYS Meshing & Geometry | 1 | April 1, 2011 05:22 |
[GAMBIT] Desperate student needs help meshing 3D GAMBIT model - please help! | lau06165 | ANSYS Meshing & Geometry | 1 | March 22, 2010 01:09 |
Meshing problem in GAMBIT | Vidya Raja | FLUENT | 0 | May 20, 2006 23:31 |
Meshing Aircraft with Gambit | Ed | FLUENT | 5 | November 9, 2004 05:04 |