|
[Sponsors] |
moving zone interface betw. 2 touching solid bodie |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 21, 2005, 06:23 |
moving zone interface betw. 2 touching solid bodie
|
#1 |
Guest
Posts: n/a
|
Hello to all out there. I'm bloody new to Fluent and my first task is to model a moving train. The train model has some boogies that touches the ground. To calculate the boundary layer between train and ground, either one of them has to move. I studied the users giude and all tutorials about moving zones, but in every case, their are always fluid zones moving without rigid bodies touching each other at the interface zone. Therefor I need some advice, what should be the best strategy to model this problem. Thanks in advance.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Another Boundary Condition to The Fluid Solid Interface | octavyo | CFX | 10 | April 10, 2017 17:57 |
Solid-fluid Interface question | shankara.2 | ANSYS Meshing & Geometry | 2 | September 14, 2011 13:49 |
solidWallHeatFluxTemperature at the solid solid interface in chtMultiRegionSimpleFoam | maddalena | OpenFOAM Running, Solving & CFD | 43 | January 11, 2011 03:39 |
how do I get a solid volume moving? | Katariina | CFX | 2 | March 28, 2008 05:50 |
solid suspension in moving liquid | Jason | FLUENT | 4 | October 27, 2003 19:59 |