CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

which Preprossecor Gambit Tgrid ....?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 12, 2005, 05:22
Default which Preprossecor Gambit Tgrid ....?
  #1
nasser
Guest
 
Posts: n/a
Hi every body which cad software is suitable? Autocad, Solid work, Pro Engineer,....?

which mesh gernerator is suitable? Gambit,Tgrid,Grid genertation,.....? Thanks
  Reply With Quote

Old   December 12, 2005, 12:37
Default Re: which Preprossecor Gambit Tgrid ....?
  #2
Freeman
Guest
 
Posts: n/a
I use AutoCAD for 2D geometry creation and CATIA for 3D. In autoCAD you can export your geometry to a .sat file that directly can be read with Gambit; with CATIA, and also with SolidWorks and Pro Engineer you can export in an easy way your geometry to IGES and then import it to Gambit.

I've heard in other posts here in CDF-online that Gambit is now an old-fashioned grid generator, but it is which I am working with: perhaps GridGen would be a better choice, but I haven't work with it. Tgrid is your choice when you've done (in gambit, for example) your surface mesh of your 3D model and wand to create a fast 3D grid with (merhaps millions) tetraedrons and with capability for create boundary layers made with prismathic elements extruded from your surface mesh.

Hope it was clear and helpful.
  Reply With Quote

Old   December 13, 2005, 02:16
Default Re: which Preprossecor Gambit Tgrid ....?
  #3
nasser
Guest
 
Posts: n/a
Thanks I heared when you use solid work and export it to Gambit you loss some fine curve.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] Cannot convert fluent or tgrid hexcore mesh aerogt3 OpenFOAM Meshing & Mesh Conversion 2 October 22, 2010 12:55
CFX Pre - TGrid Vivek Vasudevan CFX 2 March 20, 2007 07:31
TGrid: segmentation violation error Vincent FLUENT 0 February 15, 2006 11:34
Drawing in TGrid Harmeet FLUENT 0 September 22, 2004 04:56
to tgrid or not to tgrid Nurul Murad FLUENT 1 July 6, 2001 14:21


All times are GMT -4. The time now is 02:04.