|
[Sponsors] |
December 21, 2005, 02:52 |
Help: Initialization of temperature
|
#1 |
Guest
Posts: n/a
|
I have constructed a rectangular combustion chamber and i am using the non-premixed combustion using the LDO as the fuel. here i want to know what temperature should i give in the initialization. This temperature should be the flash point of the fuel or any arbitary temperature can be given. thank you.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with zeroGradient wall BC for temperature - Total temperature loss | cboss | OpenFOAM | 12 | October 1, 2018 06:36 |
Calculation of the Governing Equations | Mihail | CFX | 7 | September 7, 2014 06:27 |
Bulk temperature Tf is obtained from total or static temperature? | NPU_conanxie | FLUENT | 0 | March 30, 2011 05:56 |
temperature initialization | kunal | FLUENT | 2 | April 13, 2008 04:26 |
refference & initialization temperature | shanta | Siemens | 1 | December 10, 2004 13:28 |