[aja1345]

Hi,

I am simulating a turbine. When I start Simulation the message error appears "Error: Divergence detected in AMG solver: pressure correction
Error: Divergence detected in AMG solver: pressure correction
Error Object: #f" and I´m not able to solve it.

Boundary conditions:
- inlet: velocity-inlet (direction y)
- outlet: pressure-outlet=0

Turbulence: K-Epsilon-realizable-non equlibrium. Intensity of turbulence: 0.032 and hydraulic diameter: 0.59 m

Anyone has a hint?

thanks in advance

[LuckyTran]

Mesh quality?
Initial conditions?

Have you tried running a constant density?

[aja1345]

Originally Posted by LuckyTran

Mesh quality?
Initial conditions?

Have you tried running a constant density?

Hi,

The grid consists of structured hexahedral elements. Firstly I normally meshed until I understand that my method is right or not. How to understand mesh quality?

I selected inlet velocity for Initial conditions.

Yes, It was assumed that the fluid was incompressible(constant density) and the flow was steady and The working fluid was air.

For more information, Please see the following links. I think that the following links are related to this my problem.


http://www.cfd-online.com/Forums/flu...interface.html

http://www.cfd-online.com/Forums/flu...interface.html


I am grateful that guide me about this problem.

Best,

Aja