|
[Sponsors] |
August 28, 2006, 05:31 |
Moving Mesh Problem
|
#1 |
Guest
Posts: n/a
|
Hello Dear ALL I had a problem with the moving mesh. In my problem i move part of the mesh by using layering method.my probelm is during meshing where i mesh over a two lines combining at the corner. at this point when i move the mesh this point also moves upto next node. Although both line are rigid walls. i want that this point should not move. I try different things to avoid this i also use sliding mesh at this point but problem persists.
I shall be very great full for the reply Rashad |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moving mesh problem OpenFoam 141 | kassiotis | OpenFOAM Running, Solving & CFD | 30 | April 15, 2015 00:10 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 22:11 |
How to control Minximum mesh space? | hung | FLUENT | 7 | April 18, 2005 10:38 |
Moving mesh problem | Jan Majer | Siemens | 2 | June 10, 2003 05:19 |