# Rotational movement in 2D problem

 Register Blogs Members List Search Today's Posts Mark Forums Read

 October 18, 2007, 13:16 Rotational movement in 2D problem #1 Leverkin Guest   Posts: n/a Hello everyone, I am trying to impose as a boundary condition in a wall rotational movement. My problem is 2D and i have rotate my domain so the rotated wall be in the x - axis as tutorial says. Even though it does not work. Any suggestions?? Thanks in advance

 October 19, 2007, 06:12 Re: Rotational movement in 2D problem #2 QAISI Guest   Posts: n/a Your problem is bit similar like my one.. can you tell me what kind of BC you going to impose on it you define your problem briefly so might be I can help you..

 October 19, 2007, 07:27 Re: Rotational movement in 2D problem #3 Leverkin Guest   Posts: n/a It's a reactor. Imagine tha i have a plate where i want to impose rotation. Something like the scetch below |<-rotated plate ___________________________|________________ ^ x-axis (symmetry) but it doesn't work at all. I have tried all the solution that manual provides!! If you have any idea we can discuss it. What is your problem about?

 October 19, 2007, 09:33 Re: Rotational movement in 2D problem #4 Leverkin Guest   Posts: n/a Because my previous scetch was rather bad i am posting a new one. I hope it will be more helpfull than the other one. _ _ _ _ _ _ _ _ _ |_ _ _ _ _ the line with spaces is x - axis of symmetry and the one line normal to x - axis (the little one) is the plate where i want to impose the rotational boundary condition (of course is larger in reality). Thanks

 October 20, 2007, 00:39 Re: Rotational movement in 2D problem #5 QAISI Guest   Posts: n/a what I supposed form your sketch is you have 2d Circular domain with a wall (rotating Plate) is moving ..unlike Stirred tank wall is stationery and moving part is shaft with turbine. I reccom you first use MRF moving rotating frame..mean your domain fluid is MRF mention your rotational speed similar one to your rotating plate..and your rotating plate is your moving wall..IT it wont be work try sliding mesh... if you have still problem you send me your CAD file so I can Impose boundary condition and send back to you..

 October 26, 2007, 08:16 Re: Rotational movement in 2D problem #6 Leverkin Guest   Posts: n/a Thanks for you advices but nothing of this works. Unfortunately i cannot send you my CAD file.Thanks anyway!

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post fatb0y CFX 3 January 14, 2012 20:42 Kai_kc FLUENT 1 October 27, 2010 05:29 ParodDav CFX 5 April 29, 2007 19:13 NymphadoraTonks CFX 2 November 4, 2004 04:05 NymphadoraTonks CFX 1 October 17, 2004 18:43

All times are GMT -4. The time now is 00:13.