CFD Online Logo CFD Online URL
Home > Forums > Main CFD Forum

Pressure boundary_collocated

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 10, 2005, 11:10
Default Pressure boundary_collocated
Posts: n/a
Hi all! I have one question: How exactly can I implement an inlet pressure boundary condition for a colocated grid for compressible flow(subsonic inflow).The grid line I=1 is where I set the boundary conditions.When for this line I have P=1 bar and P'=0.0 and I find Uw from the discretised contuity equation,I compute -dP/dx like this: dP/dx=(P(1,j)-P(2,J))/dx , the pressure in the computational domain is higher than the specified boundary pressure, which shouldn't be.When on the other hand I comute -dP/dx like this: dP/dx=(P(1,J)-(P(2,J)+P(3,J))/2)/dx , the result is again the same. When finaly I set the boundary pressure in line I=2 and there I set P=1 bar and P'=0.0 I find again the same results, independently of how I compute -dP/dx there. I try to implement the precedure that are in Peric book,but with no luck. Any suggestions?
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 06:27
Pressure instabilities with interDyMFoam for the floatingObject case nbadano OpenFOAM Running, Solving & CFD 14 March 8, 2011 09:19
Using pressure outlet BC Shreyansh FLUENT 0 November 5, 2010 15:57
Help ASAP! pressure inlet & outlet engahmed FLUENT 0 June 13, 2010 15:33
Setting pressure and velocity in inlet Asghari FLUENT 5 September 22, 2006 13:23

All times are GMT -4. The time now is 15:58.