|
[Sponsors] |
June 8, 2012, 20:16 |
Cf over flat plate obtained by SST k-omega
|
#1 |
Senior Member
Mehdi Baba Mehdi
Join Date: Jan 2011
Posts: 158
Rep Power: 15 |
Hi everyone
I applied SST k-omega turbulence model on the code, I could simulate steady, incompressible turbulent flow past over Two-dimensional zero-pressure-gradient flat plate. first of all I should mention some details about grid. computations were performed on a grids of size 273×193. dimension of domains are −0.33333 < x < 2 and 0 < y < 1. grid spacing (wall normal direction) was 1 × 10−6. according to my results for Re=2e6 and comparison with theoretical formula used for Cf (Skin Friction coefficient, Cf= 0.025Re exp(-1/7)), you can see in attached file result is not very good. but in U+-Log Y+ results is good I think based on numerical result that other obtained (Rumsey and Spalart) specially in sublayer. So my question is why in sublayer U+ profile is completely match with theoretical profile but cf is not? and do you think what problem exist? |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
k-omega-SST model (OF 1.6) - turbulent flat plate | cboss | OpenFOAM Running, Solving & CFD | 25 | August 9, 2016 09:53 |
Boundary Conditions for k omega SST | dancfd | OpenFOAM Pre-Processing | 0 | June 9, 2011 23:25 |
Flow Over a Flat Plate | recon9 | CFX | 1 | January 20, 2011 21:09 |
Calculate Drag force for flat plate | vsun | FLUENT | 0 | October 3, 2010 07:56 |
flat plate transition: SST k-omega divergence | Peter Gasparovic | FLUENT | 4 | May 3, 2005 13:54 |